С помощью Logic Pro X MIDI-FX модулятор

With Logic Pro X's new Modulator MIDI FX, you now have a simple way to modulate software instrument parameters. In short, you can make awesome and interesting sounds in a jiffy! Here's how!  

С помощью Logic Pro Xs новых модулятор MIDI FX, теперь у вас есть простой способ, чтобы модулировать параметры виртуальных инструментов. Если ваши синтезаторы позволяют назначить MIDI-контроллера номера параметров, как ES2 делает, или, если они имеют MIDI Learn функциональность, как много сторонних инструментов ... Модулятор может быть легко назначены на управление почти все в них. Его темп синхронизированных LFO и длинные ENV, каждый может отправить независимых MIDI CC номера для управления параметрами, как среза фильтра, резонанс, высоту, громкость, конверт атаки /, искажения и многое другое. В этой статье я покажу вам, как использовать модулятор с логикой собственного ES2 и со сторонними инструментами.


Модулятор обзор

Во-первых, давайте взглянем на интерфейс модуляторов. Она состоит из двух основных направлений, LFO и генератор ENV. В разделе LFO вы можете выбрать из знакомой формы сигнала, как синус и треугольник, но здесь у вас есть симметрия слайдер, который изменяет форму волны.

pic 1


Вы можете регулировать скорость с синхронизированными и не синхронизированного значения, и даже настроить разрешение данными с Шагов на слайдер цикла LFO. Триггер селектор позволяет выбрать бесплатный обстановке, где LFO не вызваны входящих нот, один вариант так последовательно занимал отмечает судья предупредил перезапустить LFO, а также многоканальный режим, так что каждая новая записка, полученные перезапустит цикл LFO.

Конверт раздел может быть использован отдельно, чтобы модулировать параметры, в сочетании с ГНЧ, или может быть использован для модуляции ГНЧ себя. Вы можете настроить его задержки, атаки, удерживать и высвобождать настройки так же, как если бы это был стандартный конверт синтезатора. Эти настройки могут быть установлены гораздо дольше, хотя, чем стандартный конверт ... каждый параметр может быть установлен до 10 секунд в длину.

pic 2


Как только вы установите эти, у вас есть возможность изменения LFOs скорости или интенсивности, и / или использование его в форму другого параметра через отдельно назначаемых MIDI CC. Как и LFO, Вы можете настроить разрешение выходных данных таким образом, не идеальный склон, но лестницы шагнул через слайдер шага. Вы также триггера селектор так же, как LFOs, за исключением вариант ГНЧ, которая начинается огибающей через пиковое значение LFOs.


Шаг 1: Автоматическое Модулирующие ES2S вибрато

Откройте ES2 синтезатора и оставить все настройки по умолчанию патч. Посмотрите на дальний левый слот маршрутизатора ES2S (темные полосы) ... Колесо модуляции установлена ​​для открывания и закрывания интенсивность LFO2 на поле (Он добавляет вибрато). Его общая контролировать вибрато с помощью колеса модуляции, поэтому многие из ES2S патчи уже установлены таким образом. Выберите новый MIDI FX слот на полосе канала и выберите модулятора. Сыграйте несколько нот, он должен сразу же добавить вибрато ES2 звука с момента ее LFOs Для настройки уже установлены на колеса модуляции.

pic 3


Шаг 2: Легкая ES2S среза фильтра

Для этого звука, хотя, я хочу, чтобы иметь возможность добавить вибрато с помощью колеса модуляции фактической на моем MIDI-контроллер, а также использовать модулятор для автоматической развертки ES2S среза фильтра. Давайте вернемся к модулятора. Измените его триггера Мульти поэтому каждая новая заметка в ближайшие перезапустит LFO, а затем изменить его оценку объекта 16 общего назначения 1 из меню. Это стандартная (обычно не используется) MIDI CC числа. Модулятор теперь больше не управляет модуляцией, так что я могу использовать свой MIDI-контроллер, как обычно сейчас.

pic 4


Вернуться к ES2, а на его второй слот маршрутизатора, выберите среза 1 в качестве цели и Ctrl C (16 GP1) в качестве источника. Нажмите на ярко-зеленом треугольнике все, вплоть до, затем потяните среза 1 значение на всем пути вниз, и играть несколько нот. Теперь вы можете прослушивать модуляторы LFO радикальные среза. Попробуйте различные настройки на модуляторы сигналов и скорости ручку во время игры, но вернуть Оценить значение обратно в 1/4 и волны синусоиды.

pic 5


Шаг 3: Управление LFOs Оценить с конвертом

Сначала включите конверт, нажав на кнопку питания. Установите его задержки до 0,00 мс, его атаки, удерживать и высвобождать настройки около 2000 мс. Установите на курок, чтобы много-и поднять ENV регулятору Оценить LFO все, вплоть до. Удерживайте внимание вниз на контроллере и вы услышите прохладном спиннинг типа монета эффект.

pic 6


Шаг 4: модулятор с инструментов, которые имеют MIDI Learn

Если вы являетесь владельцем сторонних инструмент с MIDI Learn, вы можете проследить этот последний шаг. Создайте новый трек инструмент программного обеспечения и добавить инструмент с функциональностью MIDI Learn. Теперь добавьте MIDI FX модулятор, и изменить его LFOs в параметре к открытым MIDI CC, как число 16 или 17, как мы делали выше. Найдите параметр Яд как для модуляции, щелкните правой кнопкой мыши и выберите учиться. Так как модуляторы LFO уже отправки данных номер будет уроков, а модулятор немедленно начнет модуляции параметра.

pic 7


Спасибо за чтение!


Darren started making music on computers when he was a teenager in 1987. His first computer was an Amiga, and when he realized the power of computer-based production, his addiction for making electronic music began. Darren switched to Mac in 1994 and started using Logic Pro. He's been involved in many music projects over the years incl... Read More

Discussion

Robert
Hey Darren, thanx for the tutorial on Logic's new modulator! I have a question though about the modulator. For instance if I would like to modulate the Filter Frequency of a plugin, from 0 to 100, I just modulate the parameter with output 100. But what if I would like to modulate the filter frequency from 60 to 80. I can put the output level to 80, but how can I change the input level? I hope this makes sense. Thanx!
Darren Burgos
Hi Robert. Use the MIDI FX Modifier directly under MIDI FX Modulator :). Choose the same CC# for both Input Event and Re-assign To. The Scale Slider will reduce the range of the data itself, and the Add slider will move the floor of the data up. That should do it! Great question BTW.
Robert
Yes, that worked! Thanx!
Tyler
Is there a way to modulate the new Retro Synth instrument with the FX Modulator? I haven't made it all the way through the Retro Synth tutorials yet, but I haven't found a way to route the filter cutoff to the Modulator.
Darren Burgos
Hi Tyler, click the "Settings" button on it's bottom right corner. There's a controller section there that allows you to select a few targets including filter cutoff to be controlled by ModWheel, Velocity or Aftertouch. ModWheel and Aftertouch are selectable sources in Modulator. Hope That helps!
Robert
Hey Darren,

Is there a way to record (learn/latch) the effect of the modulator. I have this really complex modulation on the filter cutoff on Massive and I want to be able to time this exactly in sync with the music. But if I latch/touch activate my Massive channel, it does not record the automation of the Modulator.
Robert
Hey Darren, any updates maybe?
Darren Burgos
So sorry!!! I missed these responses. It is possible to route MIDI out of Logic, then record it back in, but it's time consuming and kills the creative flow IMO. Do it this way instead:

Directly to the right of the large Orange/Yellow colored play button there's a little rectangle with a stack of notes inside it. That's a MIDI Drag! Hold the first chords you chose, and while your holding it, drag *from the button* out and onto the track in the arrange window. Do the same thing for each of the chords you play. If they sustain, simply loop each of the regions you drag out by pressing the L button. This should do it! :)
Darren Burgos
Robert! I just realized your not talking about the arpeggiator 8). That's an awesome trick anyways for anyone reading LOL. Let me work out a method I'll post it ASAP.
Darren Burgos
OK Robert, Here goes ...I literally just made this up, so I have no idea if there are other ways to accomplish this. To me, this seems like a straight forward method...

Open Audio MIDI Setup. From it’s Window menu, select “Show MIDI Window.” Make sure that IAC Driver is enabled; double click it and make sure “Device is Online” is checked off. Double click also on the Network icon. You should have one “session” enabled under the “My Sessions” field. If not, then press the + button to create a new session. Leave the default name as “Session 1.” Now, still in the Network screen, select “IAC Driver” from the TOP Live Routings menu (the one pointing into the globe). Your done in AMS, so close it out.

Duplicate the Channel the MIDI Modulator is on, then swap out the instrument from a NI Massive to Logic's "External Instrument." Open External Instrument and select IAC Driver as the MIDI Destination. Press the record button to capture the data!

The data is “MIDI Draw” data ...not Automation. Take note of the MIDI CC number or type you sent from the MIDI FX Modulator. Click the local View Menu, then the MIDI Draw menu, then onto the specific MIDI CC (you may have to choose “other” and pick the specific number you sent). Once it’s displayed, click the Mix Menu, then the Convert Automation menu, and select “Convert Visible MIDI Draw to Automation.” Once you’ve done this press “A” to show the automation.

Last two steps! Select the automation (with the automation select tool) and copy it with Command - C. Go back to the Massive track, pick the automation parameter you’re wanting to control and use Command - V to paste it!

That’s it LOL ...see what I meant now about being somewhat of a creativity killer? Still amazing and cool that pretty much anything you can think of can be done in this amazing application wether Apple let you do it directly or not! Remember to bypass the External Instrument or the MIDI data will continue to send! Also, if you do this a lot, consider building this stuff into a template. Enjoy!
Robert
Hey Darren, first off...THANX! That is one massive post haha. Anyway 1 have 2 problems:

1. I somehow linked 16 GP 1 to the mute button of the channel. So it goes on and off. How do I reset this?

2. I'm following you up until the last step: “Convert Visible MIDI Draw to Automation.” Once you’ve done this press “A” to show the automation. This is the problem: I don't see this automation. I can move the midi section around etc, but if I press A and don't see it in one of the parameter automation sections. I can still reach it if I press view midi etc. I would like to copy the "curve" so to say that I made with the modulator and then past that curve onto various parameters, not only 16 GP 1. I hope this makes sense.

Pretty hard questions, but you seem like the right guy for the job! I'll send a recommendation to MPV HQ!
Robert
Okay I seem to be on to something. When you choose 16 General Purpose 1, Logic does not seem to “Convert Visible MIDI Draw to Automation.”, but if you choose a simpler one: panning, volume etc it does. If you now select the automation press alt and then select the automation pane you want it into, Logic asks you if you want to convert the automation to the new parameter of copy. Press convert and it moves your automation to the new parameter. Keeping a couple midi blocks with your special automation (in a template) enables you to quickly grap this automation!

Still have trouble with my 16 GP 1 which triggers muting of a channel :-S
Robert
My first reply didn't came through, so here it is again:

Problem 1:

If I modulate my 16 General Purpose Midi, it switches the mute button of my channel on and of once it reaches 50%. I don't know how I did this, but do you maybe know how to reset the this?

Problem 2:

When selecting "Convert Visible MIDI Draw to Automation.” nothing happens for 17 General Purpose Midi (I moved to 17 since 16 switched mute on and off).

Pretty hard questions, but you seem like the right man for the job! Thanx again for your help! I'll write a recommendation to MPV HQ! Thanx!

Want to join the discussion?

Create an account or login to get started!