जब सामान्य उपयोग करने के लिए

There are some basic processes that remain firmly in the "jargon category" to some beginners. Although Normalization is available as a feature in just about every DAW (and Audio Editing software) some  

वहाँ कुछ बुनियादी प्रक्रियाओं है कि कुछ beginners के लिए "शब्दजाल" श्रेणी में मजबूती से रहते हैं. हालांकि सामान्य बस के बारे में हर काला कौवा में एक फीचर के रूप में उपलब्ध है (और ऑडियो संपादन सॉफ्टवेयर) अभी भी कुछ उपयोगकर्ताओं को नहीं पता हो सकता है जब इसका इस्तेमाल करने के लिए.

Hopefully this Quick Tip will go some way to clarifying when to apply normalization techniques to your music.

क्या सामान्य है?

के रूप में यह केवल प्रक्रिया का एक संक्षिप्त विवरण है कि हम भी भारी गणित में तल्लीन करना नहीं हूँ. मूलतः, सामान्य एक प्रक्रिया है कि कतरन बिना पूर्व निर्धारित अधिकतम करने के लिए किसी भी ऑडियो के स्तर को उठाती है.

जब ऑडियो सामान्यीकृत है एक चरम स्तर के लिए अपने सॉफ्टवेयर फ़ाइल खोज और परिभाषित अधिकतम स्तर के लिए इस कदम होगा. फाइल के बाकी तो एक ही रिश्तेदार स्तर पर लाया जा. यह कैसे शून्य क्लिपिंग हासिल की है.

कई अनुप्रयोगों सामान्य प्रक्रिया को सरल और डिफ़ॉल्ट अधिकतम के रूप में 0dB का उपयोग करें, जबकि दूसरों को उपयोगकर्ता के स्तर को पूर्व - परिभाषित की अनुमति नहीं है. आप आमतौर पर पाते हैं कि समर्पित, पीक (OSX) Pro और Wavelab (विंडोज़) के रूप में पेशेवर नमूना संपादकों के एक अधिक व्यापक सुविधा सेट खेल करेंगे.

जब सामान्यकरें

सामान्य जल्दी कतरन के बारे में चिंता किए बिना एक नमूना या रिकॉर्डिंग के स्तर को बढ़ाने के लिए एक महान उपकरण किया जा सकता है. याद रखें यह सिर्फ अपने संकेत के एक रिश्तेदार को बढ़ावा देने है, तो कोई वास्तविक प्रसंस्करण जगह ले जा रहा है. आपके ऑडियो बाहर आ ही के रूप में यह लग में चला गया होना चाहिए!

सामान्य लागू करने के लिए आदर्श मंच है बस के बाद आप कुछ प्रसंस्करण आवेदन किया है और परिणाम निर्यात. संपीड़न, मॉडुलन प्रभाव या किसी अन्य प्रक्रिया को अपने लाभ कम हो सकता है. सामान्य तुम यहाँ की मदद कर सकते हैं.

बेशक आप बस लाभ बाद में उठा सकता है, लेकिन सामान्य आवेदन एक जल्दी ठीक हो सकता है और आप एक अच्छा स्रोत पर सही स्वस्थ लाभ स्तर दे सकते हैं. यह अक्सर आप एक गतिशील ध्वनि मिश्रण करने के लिए मदद और आप एक अच्छा गर्म आगे प्रोसेसर में जा संकेत दे सकता है.

सावधानी से प्रगति कर

वहाँ हालात जब आप एक विकल्प के रूप में सामान्य के बारे में दो बार सोचना चाहते हो सकता हैं. इसके लिए मुख्य कारण यह है कि जब किसी भी तकनीक का उपयोग कर लाभ में वृद्धि, यह सिर्फ अपने संकेत स्तर है कि वृद्धि हुई है, लेकिन भी किसी भी शोर या आपके ऑडियो में मौजूद दोषों का स्तर नहीं है.

इस के साथ दिमाग में, यदि आप एक बहुत ही शांत रिकॉर्डिंग है कि एक काफी उच्च शोर मंजिल है सामान्य करने के लिए चुनते हैं, शोर संकेत के साथ बढ़ जाएगा. यह केवल एक उच्च शोर के स्तर के लिए नेतृत्व करेंगे कि एक अच्छी बात नहीं है.

इन स्थितियों में यह शायद एक अच्छा विचार करने के लिए ड्राइंग बोर्ड पर वापस जाने के लिए या बहाली या शोर में कमी उपकरण के बारे में सोचना है. हालांकि कई मामलों में, सामान्य एक अत्यंत उपयोगी उपकरण है और निश्चित रूप से एक प्रक्रिया के बारे में पता होना हो सकता है.

अधिक स्टूडियो और रिकॉर्डिंग तकनीकों के लिए इन tutorials बाहर की जाँच करें!

Mo has been a professional in the music industry for around 15 years. He has released material with the world's leading record labels and also produces music for TV and Film. Mo is also a prolific writer and is a regular contributor to magazines such as Music Tech, Future Music and EQ magazine. There isn't a piece of music software tha... Read More

Discussion

Victor Mason
Great article! When you're doing your own work and Logic is the final and finished output, normalizing is a nice way to top it off. I agree, back it off of 0db. I use -1db down because Most internet downloads come out louder. Sometimes it helps.

It might be worth mentioning that if the final mix is heading to a mastering house, they prefer it not be normalized and like their track levels left with at least 6-9dbs of headroom.
Harmonik
Is it okay to normalize the output of the project in the bounce section ? any advantages/disadvantages of doing so ?
Mo Volans
Victor... 100% agree with your comments there ;)

and Harmonik, yep you can normalise in the bounce section. This is exactly the same as normalising using any other method.
Victor Mason
Harmonik,
Logic has so much headroom it is quit literally impossible to overload it internally. If any track were hitting 0db or higher, the beauty of Logic is you can simply lower the level, even at the output. If the level is goin into a plug in, that is another story and clipping or overload can occur. Logic is able to Handel incredibly diverse levels. Normalizing works well to balance up tracks in the mixing stage without leaning on compressors. I liked the part in this article where Mo points out, the ideal time for normalizing is after putting some processing on the track. That is a great tip to keeping you mix in "homeostasis"... So to speak.
Ed
This article got me thinking...
When recording music (as I understand it) there's three phases (recording, mixing and mastering). You guys have plenty of tutorials on each of these, but I'm not sure how one blends into the other. Victor mentioned that mastering engineers like a few db of headroom. This was news to me, but obviously, a very important bit of info. Any thoughts on a tutorial where you follow a song from microphone to iTunes (or CD)? Just a thought. Thanks for all the great content!
Victor Mason
There are a lot of good mastering facilities which usually specify what they like for file format and so forth. I would do some checking and get a feel for what you're looking for answer wise. Each facility will want something specific but almost all need some headroom to treat the material so 6-9 dbs as a good rule of thumb but not written in stone.
Harmonik
Do mastering engineers allow clients to sit in sessions ?
Victor Mason
Do magicians allow customers to sit in during rehearsals?
Alan
What happens to the quality of music that's been normalized twice. For example: I'm ripping and recording old disks and tapes I have and saving them as WAV files. Sometimes the volumes don't come out the same even though the burning program is checked to normalize. Separate programs for ripping or recording have a normalize feature, so it could be done once there and then again in the burning program, but does this make the music sound a bit flat or odd ? Thanks ....
Alan

Want to join the discussion?

Create an account or login to get started!