Soundmit 2019: Dreadbox Chromatic Eurorack Synth Modules

Synth specialists Dreadbox have released a raft of new eurorack synth modules at Soundmit 2019, and we were on hand to get a walkthrough from the developers themselves! Check out the video below...

List Of Modules

Performance VCO

• Analog VCO with range from 16Hz up to 32.000Hz
• Variable Voltage Controlled Wave Shaper
• Advanced pitch control with Voltage Controlled Quantizer, so it is always in tune
• Hard Sync Input
• Separate Pulse Output, for use as a clock or to sync other oscillators
• Power Consumption: 114mA @ +12V , 46mA @ -12V
• 35mm depth
• 10HP

Filter-Mixer-VCA

• Analog Wave Generator Processor
• 3 to1 mixer
• Dual Filter in series
• 24dB resonant Low Pass Filter
• 18dB non-resonant High Pass Filter
• Exponential VCA with peak indicator (above 10pp)
• LED indicator for all controls to illustrate the current CV Sum

3-Stage Delay

• 3 Stage Hybrid Delay based on the Erebus’s Circuit
• Consisted of 3 echo circuits in series
• Outputs for stage 1 and 2 (output level is 1/2 lower than the incoming signal)
• 2 different Feedback controls for different stages
• LFO with range
• Voltage Controlled Delay Time with range from 30ms up to 1sec
• Separate input for modular level signals
• And separate input for signals up to guitar levels

Dual Modulator

• Dual Modulator with 3 different modes
• Rise-Hold-Fall Function Generator
• Delay-Rise-Fall-LFO
• ADSR envelope
• Variable Curve Response
• Separate Trigger Input
• Voltage Controlled over Time and Level (velocity)
• Time Response from 1ms/curve up to 20sec/curve

Noise-Crush-Filter

• Noise Generator (white, white to pink, white to blue, scatter, digital, pitch)
• Bit Crusher with range from 1sec up to 8kHz
• Digital Noise can also be used as a Random Gate Generator
• Dual Filter (parallel) 12dB Low Pass and High Pass Filter
• When you insert a signal to the External In, the Internal Noise generator is cancelled and the External Signal is in process
• LED indicator for all controls to illustrate the current CV Sum

CV/Audio Manipulator

• CV Audio Manipulator
• 4x Attenuinverters
• Offset Generator (+/- 10V)
• 4 to 3 Mixer (it can also work as a buffered splitter)
• Voltage Controlled LFO with range from 30sec up to 440Hz
• Pulserizer effect (will distort and convert signals into a square wave)