レビュー:パルスコントローラとMIDI音源にあなたのテーブルを回し

So, you've got a drum pattern in your head that you want to get into your DAW, but are lacking a drum pad / MIDI keyboard. Enter Pulse controller which Toby Pitman discovers is a little known gem.  

少し前に作曲家の友人が本当に格好いいデバイスへのリンクを掲載した。そのデバイスがあったパルスコントローラ 。それは本質的に、あなたはそれを押すことで、再生可能なMIDIコントローラに任意の表面を回すことができます。

今、この背後にある考え方は、ピエゾピックアップはドラマーが長年のMIDIトリガーすることができたように新しいものではありませんが、これは専門家のコンバータやドラム脳がMIDIにアナログ信号に変換する仕事をする必要があります。

パルスコントローラは、しかし、このアイデアを取り、根本的にいくつかの巧妙なソフトウェアを介して、自分のコンピュータ上のオーディオ入力で誰にも、それがアクセスできるように、それを簡素化します。私は、このエキサイティングなを見つけた理由は、私はテーブルの上にそれを裂くことができるドラムを演奏することはできないかもしれないが、ということです!だから私は1つを注文した...


あなたは何を得るのですか?

パルスコントローラは、ピエゾ·マイク(私はクリップオンバージョンを得たが、あまりにサクションカップ1 theresの)、あなたがまっすぐに、お使いのMacのオーディオ入力にピックアップを接続することができます1/8ステレオジャックコンバータ〜1/4であり、含まれていますソフトウェア。

pulse image


ちょうどあなたのコンピュータまたはオーディオ·インターフェイスにピックアップを接続して、その問題(クリップが3cm程度の厚さを収容することができます)して行くためにあなたの利益のために好きなあなたの机または任意の面にもう一方の端を取り付けます。


ソフトウェア

マジックが起こるところパルス制御ソフトウェアがある。 MacとPCの両方との互換性があります。そして、あなたがする必要があるすべてをインストールした後、いくつかのパラメータを設定しています。

最初は、あなたのオーディオ入力です。入力設定で入力を選択して、ゲインと感度を調整。入力信号を見るためにメーターをtheresの。

input settings


あなたのオーディオドライバおよびバッファサイズを設定します。下のバッファは遅延を低減します。 MIDI信号の出力を設定します。パルスコントローラ1からの内部MIDIもののための罰金ですが、あまりにも外部MIDIポートへの経路、これをすることができます。

output


注モード

あなたは、パルスコントローラがMIDI出力する方法を決定5つのモードから選択することができます。最初は固定注意です。これは、単にあなたがノートナンバーセレクタで設定された所望の音符を再生します。また、あなたはノートはノートの長パラメータを使用して再生することにより、なりたいどのくらいの期間を定義することができます。また、あなたのMIDIチャンネルを設定することができます。スネアをトリガーする例をHERESに。

[オーディオID = "21420"]

Triggering a snare


次はカスタムです。ただ入力ノートはキーボードのようなにおいは、次にノートを順番にアルペジエーターを使用しています。すべての通常のアルペジエーターモードを見つけるYoullは。これは、メロディック、コンテンツを再生したり、非常に興味深いです、ドラムの異なるアーティキュレーションをランダム化することができます。 [外部入力モードを使用してシーケンサーからソフトウェアを供給することができますが、このモードでは、ノートの一組に結び付けている!

different modes


あなたはロジックProでこれを設定する方法相続。ただ、外部のMIDI機器を作成して、パルスコントローラ1へのポートを設定します。パルス制御ソフトウェアでMIDI入力としてコントローラ1をパルスとARPモードを設定することを選択した。あなたはそのトラックで再生任意のMIDIノートは、ソフトウェアに送られます。どのように音を相続。

Set up for Logic Pro X

[オーディオID = "21428"]

(すべてのノートは私が私の机を押すことで起動されます、そのとても楽しいが!)


次はベロシティ·スイッチです。これを使用すると、ヒットの速度に基づいて、最大3つの異なるノートナンバーにMIDIをリダイレクトすることができます。私は将来的に変更される可能性があることを願っていますが、現在の出力速度が固定されています。

Velocity switch


最後に我々は音階モードを持っている。これは、様々な再生バリエーションと21のスケールから選択することができ、あなたがキーとキーレンジなどの制御を取得

Musical Scale mode

また、便利で異なる設定のプリセットを保存することができます。


結論

これはこのような単純な考えに基づいて考えると、パルスコントローラは年齢で買っアイブ最高のものに持っている。キーボードよりも、その多くの自然なパーカッションサンプルを再生するための。 MASCHINEのような何かにドラムパッドを演奏よりもさらに表現力。メロディック側は、特に外部入力を新しいアイデアを作成するための本当に感激です。確かにそこに制限があるが、そのような良い楽しいyoullはそのかなり速いことを忘れる!

パルスコントローラは偉大な小さな製品であり、常に今差し込まれて。クリップバージョンは56ドルであり、それのすべてのビットに値する。単に輝かしい!

ウェブサイト: http://www.pulsecontroller.com

For the past 20 years Toby has worked as a professional guitarist, programmer and producer. Clients include Sir Paul McCartney, George Michael, Shirley Bassey, Yusuf Islam, Giles Martin as well as the London 2012 Olympic Ceremonies. He has also worked extensively in TV, Advertising and Film. As well as composing himself he has also ... Read More

Discussion

BenB
Now THIS is an awesome product I'd love to have on the road with me. Even in the studio. As a life long table top drummer, this is killer! Thanks for such a great article!
Rounik
Thanks Toby for bringing Pulse Controller to my attention.

Looking for the "Buy Now" button already...

:)
Rexinator
Toby,
Thanks for the review on the Pulse controller. I picked up one and installed the software, but I'm a bit baffled by what's happening in Logic. I ran the Pulse device into a line input on my Apogee Ensemble interface and selected the proper input in the Pulse Controller MIDI/Audio Setup I'm pretty sure I did the setup correctly (just followed the instructions). The next step in the booklet is to go under MIDI Preferences and enable 'from Pulse Controller 1'. But of course there is no such option in Logic (that I can find). Do I need to set this up in the main Audio MIDI Setup? Or in the Environment? I tried creating an external MIDI track and selecting Pulse Controller 1. I got a live signal, and I could record some MIDI events on that track, but other audio tracks in my project were completely scuzzed out. I've never heard anything like that. I could restore normal audio by deleting the external MIDI track and powering down my Ensemble and then powering it back up. I'm hesitant to use the Pulse Controller until I figure out what the problem was. FYI, I had the buffer size in the controller set to 16 (I'm a fast drummer). Is that too low? Thanks in advance for any insights.
Rexinator
Toby,
After some trial and error, I realized the Pulse Controller is enabled simply by setting the Audio/MIDI Setup and Input Settings correctly. Sorry about the long comment above. However, I noticed a couple of other things that might merit attention. [Again, the device is connected to my Apogee Ensemble interface, and Logic 9 is my DAW.]
1) I noticed that, when the Buffer Size is set to the lowest value (16) or 32, any audio regions that are on other tracks sound very scuzzy during playback. This can can be corrected by turning off or closing the Pulse Controller application. It seems strange that this should occur, because the Audio settings in Logic still indicate a buffer size of 256 (for Logic). If I change the Buffer Setting in the Pulse Controller to 64 or higher, the scuzziness is minimal or absent. This behavior makes for a little difficulty in tapping out fast beats against an existing audio track
2) I also noticed that when I insert a piano instrument or other non-percussion instrument on the software track, it is impossible to play notes in quick succession. It appears that the program requires a Note Off signal before it can accept another note. I tried playing with the Fixed Note Duration, but the only thing that seemed to work was switching to the Choke option. The manual didn't say anything about this behavior, so I was wondering if the problem has more to do with the way MIDI events are handled by the software instrument (maybe something to do with the note duration in the Events list?).
I e-mailed the manufacturer about these questions. Thanks again.

Want to join the discussion?

Create an account or login to get started!