एक संगीतकार दोस्त थोड़ी देर पहले एक बहुत अच्छी लग रही डिवाइस के लिए एक लिंक पोस्ट. यही युक्ति था पल्स नियंत्रक . यह अनिवार्य रूप से आप बस इसे मार से एक बजाने मिडी नियंत्रक में किसी भी सतह बारी करने के लिए अनुमति देता है.
अब इसके पीछे विचार पीजो पिकअप ड्रमर साल के लिए मिडी को गति प्रदान करने के लिए अनुमति दी है के रूप में कोई नई बात नहीं है लेकिन इस विशेषज्ञ कन्वर्टर्स या ड्रम दिमाग मिडी को एनालॉग सिग्नल में परिवर्तित करने के लिए काम करने की आवश्यकता है.
पल्स नियंत्रक हालांकि इस विचार लेता है और मौलिक कुछ चालाक सॉफ्टवेयर के माध्यम से अपने कंप्यूटर पर एक ऑडियो इनपुट के साथ किसी के लिए सुलभ बना यह सरल करता है. मैं इस रोमांचक पाया कारण मैं मैं एक तालिका के शीर्ष पर यह ऊपर चीर कर सकते हैं ड्रम खेलने के लिए सक्षम नहीं हो सकता है, हालांकि यह है कि! तो मैं एक का आदेश दिया ...
तुम्हें क्या लगता है?
पल्स नियंत्रक पीजो माइक को (मैं क्लिप पर संस्करण मिला लेकिन वह भी एक सक्शन कप भी ना), आप सीधे अपने मैक ऑडियो इनपुट से पिक प्लग करने की अनुमति देता है जो एक 1/4 1/8 स्टीरियो जैक कनवर्टर, और शामिल सॉफ्टवेयर.
बस अपने कंप्यूटर या अपने ऑडियो अंतरफलक में पिक प्लग और आप उस बात (क्लिप के बारे में 3cm की मोटाई को समायोजित कर सकते हैं) और अपने अच्छे जाने के लिए की तरह अपने डेस्क या किसी भी सतह को दूसरे छोर देते हैं.
सॉफ्टवेयर
जादू होता है जहां पल्स नियंत्रण सॉफ्टवेयर है. दोनों मैक और पीसी के साथ संगत. और स्थापित करने के बाद आप सब करने की ज़रूरत कुछ मानकों की स्थापना की है.
पहले अपने ऑडियो इनपुट है. इनपुट में सेटिंग्स आपके इनपुट के लिए चुनते हैं और लाभ और संवेदनशीलता को समायोजित. आने वाले संकेत देखने के लिए एक मीटर Theres.
अपने ऑडियो ड्राइवर और बफर आकार निर्धारित करें. लोअर बफ़र्स विलंबता कम हो जाएगा. मिडी संकेत के लिए एक उत्पादन सेट. पल्स से नियंत्रक 1 आंतरिक मिडी सामान के लिए ठीक है, लेकिन आप भी बाहरी मिडी बंदरगाहों के लिए मार्ग यह कर सकते हैं.
नोट मोड
आप पल्स नियंत्रक मिडी उत्पादन होगा कि निर्धारित पाँच तरीके से चुन सकते हैं. पहले फिक्स्ड नोट है. यह बस आप नोट संख्या चयनकर्ता में सेट है कि वांछित नोट निभाता है. आप यह भी ध्यान दें नोट अवधि मापदंडों के साथ खेलने से रहना चाहता हूँ कितनी देर परिभाषित कर सकते हैं. आप भी अपने मिडी चैनल सेट कर सकते हैं. एक जाल को ट्रिगर एक उदाहरण heres.
[ऑडियो आईडी = "21420"]
अगले एक कस्टम है. बस इनपुट नोटों कीबोर्ड पर तरह youd और फिर नोट के माध्यम से चक्र को arpeggiator का उपयोग करें. सभी सामान्य arpeggiator मोड पाते Youll. यह आपको बहुत ही रोचक है जो एक ड्रम के विभिन्न articulations मधुर सामग्री को चलाने या randomize करने के लिए अनुमति देता है. आप विदेश इनपुट मोड का उपयोग कर एक sequencer से सॉफ्टवेयर फ़ीड कर सकते हैं, हालांकि इस मोड में आप नोटों की एक सेट से बंधा रहे हैं!
आप तर्क प्रो में इस सेट अप कैसे यहाँ है. बस एक बाहरी मिडी साधन बना सकते हैं और पल्स नियंत्रक 1 करने के लिए अपने पोर्ट सेट. पल्स नियंत्रण सॉफ्टवेयर में मिडी इनपुट के रूप में नियंत्रक 1 नाड़ी और एक ARP मोड सेट करने के लिए चुनते हैं. आपको लगता है कि ट्रैक पर खेलना किसी भी मिडी नोट्स सॉफ्टवेयर को खिलाया जाता है. यहाँ कैसे है कि लगता है.
[ऑडियो आईडी = "21428"]
(सभी नोटों मुझे मेरी मेज मार से शुरू हो रहे हैं. इसका इतना मज़ा!)
अगला ऊपर वेग स्विच है. इस के साथ आप हिट के वेग के आधार पर करने के लिए तीन अलग नोट संख्या को मिडी पुनर्निर्देशित कर सकते हैं. मुझे लगता है कि भविष्य में बदल सकता है उम्मीद है कि हालांकि वर्तमान में उत्पादन वेग तय हो गई है.
अन्त में हम संगीत स्केल मोड है. यह आपको विभिन्न पार्श्व बदलाव के साथ 21 तराजू से चुनने के लिए अनुमति देता है और आप कुंजी और कुंजी श्रृंखला आदि पर नियंत्रण पाने के लिए
आप भी काम है जो अलग setups के लिए presets बचा सकता है.
समापन
इस तरह के एक साधारण विचार पर आधारित है ध्यान में रखते हुए, पल्स नियंत्रक उम्र में खरीदा Ive सबसे अच्छी बात हो गया है. एक कुंजीपटल की तुलना में इसकी एक बहुत अधिक प्राकृतिक टक्कर नमूने खेलने के लिए. Maschine तरह कुछ पर ड्रम पैड खेल से भी अधिक अर्थपूर्ण. मधुर की ओर विशेष रूप से विदेश इनपुट नए विचारों को पैदा करने के लिए वास्तव में प्रेरणादायक है. यकीन है कि वहाँ सीमाएं हैं लेकिन इसकी इतनी अच्छी मज़ा है youll कि बहुत तेजी के बारे में भूल जाओ!
पल्स नियंत्रक एक बड़ा सा उत्पाद है और लगातार अब में खामियों को दूर किया है. क्लिप संस्करण $ 56 थी और इसके बारे में हर बिट के लायक है. बस शानदार!
Discussion
Looking for the "Buy Now" button already...
:)
Thanks for the review on the Pulse controller. I picked up one and installed the software, but I'm a bit baffled by what's happening in Logic. I ran the Pulse device into a line input on my Apogee Ensemble interface and selected the proper input in the Pulse Controller MIDI/Audio Setup I'm pretty sure I did the setup correctly (just followed the instructions). The next step in the booklet is to go under MIDI Preferences and enable 'from Pulse Controller 1'. But of course there is no such option in Logic (that I can find). Do I need to set this up in the main Audio MIDI Setup? Or in the Environment? I tried creating an external MIDI track and selecting Pulse Controller 1. I got a live signal, and I could record some MIDI events on that track, but other audio tracks in my project were completely scuzzed out. I've never heard anything like that. I could restore normal audio by deleting the external MIDI track and powering down my Ensemble and then powering it back up. I'm hesitant to use the Pulse Controller until I figure out what the problem was. FYI, I had the buffer size in the controller set to 16 (I'm a fast drummer). Is that too low? Thanks in advance for any insights.
After some trial and error, I realized the Pulse Controller is enabled simply by setting the Audio/MIDI Setup and Input Settings correctly. Sorry about the long comment above. However, I noticed a couple of other things that might merit attention. [Again, the device is connected to my Apogee Ensemble interface, and Logic 9 is my DAW.]
1) I noticed that, when the Buffer Size is set to the lowest value (16) or 32, any audio regions that are on other tracks sound very scuzzy during playback. This can can be corrected by turning off or closing the Pulse Controller application. It seems strange that this should occur, because the Audio settings in Logic still indicate a buffer size of 256 (for Logic). If I change the Buffer Setting in the Pulse Controller to 64 or higher, the scuzziness is minimal or absent. This behavior makes for a little difficulty in tapping out fast beats against an existing audio track
2) I also noticed that when I insert a piano instrument or other non-percussion instrument on the software track, it is impossible to play notes in quick succession. It appears that the program requires a Note Off signal before it can accept another note. I tried playing with the Fixed Note Duration, but the only thing that seemed to work was switching to the Choke option. The manual didn't say anything about this behavior, so I was wondering if the problem has more to do with the way MIDI events are handled by the software instrument (maybe something to do with the note duration in the Events list?).
I e-mailed the manufacturer about these questions. Thanks again.
Want to join the discussion?
Create an account or login to get started!