レビュー:Abletonのプッシュ2

Push 2 is the new incarnation of Ableton's Live controller and instrument. There's improvements all round and Noah Pred dives in to discover what's changed and how it'll improve your Live workflow.

Ableton社が最初のライブ9と一緒にプッシュをリリースしたとき、彼らはスタジオのワークフローに革命を起こしながら、機器とコントローラ間に線をぼかし、DAW - ハードウェア統合の限界を再定義しました。この週末の驚きの発表でプッシュ2自分で閉会基調講演中にデビュー音楽メーカーのカンファレンスで、ループ、 Abletonのは、再びゲームを変更するように設定されています。その旗艦コントローラの改正は、いくつかの魅力的な新機能を誇っていますが、オリジナルよりも高い価格のタグが付属しています。それで大騒ぎは何ですか?

Build

最初のプッシュは、世界的に大ヒットした、とAbletonのは、式から、以前のハードウェアパートナー赤井を排除し、上から下へのサプライチェーンを担当してきました。プッシュ1と2の間のサイズと重量の違いは、新しいモデルが若干薄くて軽い出てきたものの、まだ音楽的虐待の長い一日のために十分に頑丈以上のようで、公称です。どういうわけか、私はオリジナルのプッシュのゴム引き仕上げは、使用の不足からスタジオで何よりもほこりを引き付けるように見えた、と確かにないことが判明。ありがたいことに、Abletonのは永久にこの問題を解消しているようだここで滑らか​​な陽極酸化アルミニウム天板を選択しました。

Ableton Push 2 photo top view

64ベロシティ・センシティブバックライト多色パッド、リボンタッチストリップ、8タッチセンシティブ・ロータリーエンコーダ、各辺に沿って専用のコンテキストボタンの配列:一般的なレイアウトは基本的に同じように表示されます。豪華なフルカラー表示は、最初の版は、単にその比較的貧弱な液晶で配信することができませんでした詳細レベルを提供するために飛び出し。コンピュータを見ずにライブナビゲート、照明条件の広い範囲でどの角度から見たときに鮮明なされるように設計だけで全体の多くをよりリアルになりました。

むしろ以前は単に画面の下に位置し、専用の機能ボタンの二列よりも、新しいマルチカラーバックライト機能ボタンは、直感的な文脈の相互作用を可能にする、ディスプレイの下に上記の1行1行に分割された、トラックで色分けされましたおよびその他の情報が表示されます

凹ん機能と専用ボタンは、高コントラストのバックライトであり、満足のいくまだ微妙な確認クリックをお届けします。可能な限り、不要なボタンが削除されました:内外にボタンが今コンテキストナビゲーション矢印で置換され、専用のボリュームとパン

2の応答パッドはもう少し敏感で、以前のモデルよりも柔らかいようで押し込みます。

3つの追加ボタンが専用のレイアウト]ボタンの形で表示されます

Adjusting pad sensitivity on Ableton Push 2.

2の応答パッドはもう少し敏感で、以前のモデルよりも柔らかいようで押し込みます。 3つの設定

Browser

最初のプッシュで、私はしばしば自分自身がブラウザをナビゲートするために、コンピュータに戻って発見しました。これは、多数のサードパーティ製プラグインの私の習慣的な用途に大部分によるものでした

Ableton Push 2. 

私は今、私はプッシュから直接必要なすべてのデバイスにアクセスするが、スムーズにカスケードサブフォルダメニューをスクロールするエンコーダを使用しての組み合わせは、それがはるか​​に楽しいプロセスになることができますだけでなく、

おそらく、新しいプッシュブラウザの最も顕著な特徴は、無関係なカテゴリの文脈除去は、次のとおりです。たとえば、オーデ​​ィオトラック上のデバイスのために閲覧しているMIDIエフェクトや楽器フォルダを表示するので、表示されません。単純にプッシュする必要はありません彼らは、検索を合理化し、必要なツールを見つけるプロセスをスピードアップ。残念ながら、オーディオファイルはプッシュブラウザを介してオーディオトラックにアクセスできないまま。これとは別に、私はプッシュ2は、現在のGUIブラウザ超えると上記の優れたブラウジング・インターフェイスとして強い場合がありますと言うでしょう。

Simplify

プッシュ2は本当に楽器とクリエイティブツールとして一歩前進をとる場合、再構築の簡素デバイスによって可能になった新しいオーディオの操作です。新しいシンプルで詳細に入るがなければ

プッシュ2は、実際に楽器として一歩前進を取り、創造的なツールは、新しいオーディオの操作である場合

クラシックは、同じ出発点からすべてのトリガーのノートを演奏し、以前より簡単なの挙動を複製

プッシュが本当に出番スライスモードです。簡単に構成スライスにサンプルを分割すると、使用可能なスライスの数を調整する感度ダイヤルで、簡単です。パッドスライスモードでは、あなたがそれに応じて対応するパッドをトリガすることによって、サンプルの再生などのパッドに割り当てるチャンクを指定することができます。それはのこつを得るためにいくつかの練習がかかりますが、プッシュを使用すると、ズームインので、スムーズに再度マウスを使ってサンプルを編集することは決してないだろうことは、各スライスの開始位置を微調整することができます。ポリフォニック・モードは、ドラムラックスタイルのステップシーケンサーにスライスモードのスイッチのレイアウト]ボタンを押すことながらあなたは、デフォルトの64パッドモードで同時に複数のスライスを再生することができます

Drum rack in device mode

ドラムは、デバイスモードでラック。

Pushing Forward

お使いのコンピュータを見る必要がなく作成することができます楽器:疑いプッシュ2は、彼らが作るために着手したマシンに非常に近いのAbletonの主力コントローラをもたらしていないあります。プッシュを取得するが、今ゴマ」差し出した好奇心のために、2の新機能がやや高い値札にもかかわらず、説得力のあるケースを作るべきで押し込みます。私はまた、Abletonのは、すぐに十分なプッシュ2のためのより多くのクールな機能を発表されるであろうと想像する必要がありますが、我々はちょうど彼らがラインの下の店で持っているものを参照するのを待つ必要があるでしょう。

すでにプッシュを所有するのであれば、あなたは本当に2を押して、必要なのでしょうか?上品な動きで、ライブ9.5における主な新機能の多くは、同様にプッシュ1に利用可能であるが、全くその新しいディスプレイと競合するが、単にありません。商標流体ワークフローが1から2に多かれ少なかれ完全に変換しますが、時々私は自分自身が今プッシュ2に瞬間的な機能に還元されるプッシュ1のラッチミュート/ソロ/停止ボタンを願っ見つけました

Slicing and playing samples in Ableton Push 2

アップグレードを考慮し、それらのための契約を甘くするために、Abletonのは、他のメーカーから多くのことを学ぶことができる単位のリターンモデルを発表しました。返さプッシュ1台を寄付することで、国際社会への貢献

価格:EUR 699 / USD 799

長所:流体、新鮮なデザインのプッシュ1の感動的なワークフローを強化。シンプルの新しいバージョンとの統合は新しいレベルにサンプル操作かかります。ゴージャスなディスプレイでエレガントなエンコーダの統合は事実上、LiveのGUIに頼る必要がなくなります

短所:凹型USB入力は、汎用のUSBケーブルを受け付けないことがあります。有用であるディスプレイおよびバックライト用電源供給を必要とします。ハードウェアの接続にはMIDI出力ません。画面は傷がつきやすいように思われます。

ウェブサイト:https://www.ableton.com

 
Synthesis 101
The Filter
by Bob Moog Foundation

"Noah Pred is a Canadian record producer, sound designer, technologist, DJ, and Ableton Certified Trainer living in Berlin, Germany. Releasing dozens of records and touring extensively since the '90s, he currently teaches a wide variety of techniques for stage and studio at the BIMM Institute. For more information, please visit: http://..." Read More

Discussion

lostinthesound
Hi Noah,

Great review and write-up overall. If I may, I'd like to point out three glaring omissions that I hope will be added into your already excellent review, as they're the kind of things a consumer should be made aware of ahead of time:

1. No Dedicated Hot Swap Button. More than anything, this is a bit of annoyance considering that such a simple (but effective) function has yet to be programmed in. I primarily utilize the hot swap function when testing out different hits with my drum rack, so having to constantly reach for the mouse button to engage hot swap functionality is quite cumbersome.

2. HUGE Velocity Spike Bug. When playing chords using the brilliant Push 2 pads, there is currently a bug (acknowledged by Ableton) that causes the velocity value to spike to 127, despite the user applying a light touch. The current Beta provides some relief to the bug, but it is still quite present when playing chord progressions. Ableton is currently working on a permanent fix, but no timetable has been given. This, for me personally, verged on being a deal breaker. The best work around is to currently engage a fixed velocity value to prevent spikes, but this prevents expressive play of synths the make use of velocity and aftertouch functionality. The result is very static sounding progressions.

3. Lack of BPM Input Dialog Box for Simpler. This has proven to be a huge pain. In past, dropping an audio file onto an audio track would reveal an additional Warp box with an area where the user could input the audio file's BPM, helpful when Live's auto analysis is incorrect. With Push 2, the emphasis is placed on a near all MIDI workflow, so said audio files are dropped into a MIDI track loaded into instance of Simpler. The problem is that once the file has been loaded into Simpler, the user cannot define the BPM. For example, let's say I want to use a 128 BPM vocal sample in a Drum n Bass tempo'd project (174 BPM). If the project is set to 174 BPM, if the audio sample loaded via Push 2 into a instance of Simpler is analyzed with the incorrect BPM, there is no way for the user to correct it. There is no rhyme or reason to why Live can accurately analyze some audio files and not other when loaded into Simpler, which makes it all the more frustrating.

Push 2 is a great controller, the OLED screen and ingenius function mapping is worth the price of admission. However, the Velocity Spike-Bug is something that the team really should have had fixed prior to release as it directly affects one of the core fundamentals of creating music: playing chords with expression. I can't wait to see what the future holds for Push 2, but I (and many other Push 2 owners) hope a fix is coming sooner than later.

Cheers.
Noah Pred
Hi there - thanks for the feedback.

With regards to the lack of a dedicated Hot Swap button, while the improved Push 2 browser does provide similar functionality, I can see how this would be problematic for certain users. As someone who's never made much use of Live's Hot Swap functionality, it wasn't something I was looking for, which should explain the oversight. My apologies.

As for the serious velocity spike bug you've mentioned - though I've yet to personally experience it and this is the first I've heard of it - I'm astonished it wasn't caught during the extensive beta-testing process. That said, I believe Ableton is working to address this issue with a firmware update that should be available soon.

The BPM dialog box for Simpler is a great idea that I hope they will implement with a future update as well.

Happy Pushing!
lostinthesound
Wow! Thanks for taking the time to reply, I wasn't expecting that. :)

I completely understand the omission of the Hot Swap function from your review now based upon your POV and workflow.

Luckily, Live's newest Beta addresses the velocity spike issue. While it's not 100% resolved, the spikes aren't nearly as frequent or dramatic. The spike is caused by users like myself who tend to rest their fingers on Push's pads (in my case specifically, when using two hands to perform), while only certain fingers are applying pressure/striking for notes. What happens is push cannot determine whether the rested fingers are a applying a very light touch or null, so it reverts to maxing out the velocity which is something that can stick out when playing chords. Adjusting the Pressure Threshold setting doesn't yield any different result. But as mentioned, the latest release notes of the most recent Beta references this nasty bug and provides an interim fix.

Regardless, Push 2 is a remarkable controller with potentially limitless options. I'm eager to see what type of scripting and apps are developed by Ableton Push 2 power users and how they'll take advantage of the gorgeous screen. :)

Cheers.

Want to join the discussion?

Create an account or login to get started!