로직의 자동화 모​​드 설명

Automation is literally one of the best things about modern music production software. Hopefully I don't sound old when I say that I can clearly remember using systems that had zero automation or call  

자동화 그대로 현대 음악 제작 소프트웨어에 대한 최고의 것들 중 하나입니다. 내가 분명하게 제로 자동화 또는 콜백을했고 그것이 잘되었다 시스템을 사용하여 기억할 수있는 그 말을 할 때 다행스럽게도 필자는 예전 같진 않은 데요 ... 악몽!

Now we can record, automate and edit any movements we make on just about any parameter in our DAW. This is truly a great thing but there are a few pitfalls that you have to look out for. Here we take a look at understanding the various automation modes in Logic Pro.

자동화 쓰기

갓 기록이나 프로그램 추적하기 위해 최초의 자동화 데이터를 작성하면 세 자동화 모​​드 (쓰기, 래치와 터치) 중 하나를 사용할 수 있습니다. 이 모드의 모든 행복 적절한 자동화 추적하기 위해 움직임을 기록합니다.

그래서, 프로젝트 연주를 쓰기 모드로 들어가기 및 매개 변수 - 플러그인 사용자 수준, 팬 및 이동 시작합니다. 작업이 완료되면 그 모든 기록되어 찾을 수 있으며 사용 준비 완료.

왜 물고 대 쓰기 모드를 사용합니까?

그럼 왜 그때 물어, 로직 세 쓰기 모드를 가지고 언제 우리가 그들을 사용합니까? 음, 논리가 재생되는 때 기록 자동화 데이터를 계속 같이 래치 모드는 가장 유용한 모드 중 하나이고 당신은 매개 변수 / fader 이동 완료되었습니다. 귀하의 컨트롤러 또는 마우스로 매개 변수를 이동할 때까지 그것은 또한 기존의 자동화 데이터를 쓰지 않습니다.

더 많은 파괴 쓰기 모드는 일반적으로 전염병처럼 피해야한다.

그것은 전통적인 의미에서 자동화 데이터를 쓸 않지만 모든 트랙에 녹음되어 다른 아무것도 닦아 것입니다. 당신이 그것을 필요하지하고 "그것이 자동화 모드를 완료하기 위해서만있다"라고 거의 것입니다 그들의 설명서에도 애플은 상태.

터치 모드는 무엇입니까?

터치 모드는 정말 사용할 모드입니다 그것이 파괴 비이며 문제의 매개 변수를 조정하지 않을 경우 귀하의 기록된 데이터가 손상 단풍되는 모드를 래치와 매우 비슷합니다.

편집자 참고 : 모드를 읽기와 같은 터치 모드 본질적으로 작동합니다. 당신이 터치 컨트롤러 또는 마우스로 매개 변수를 변경이 이루어질 때까지 기존의 모든 자동화 데이터를 읽을 수 있습니다. 일단 마우스 버튼이나 컨트롤러 기존 자동화 데이터를 읽을 것입니다 놓습니다.

예를 들어,은 코러스 부분에서 볼륨을 자동화하려는 경우 터치 모드 위대 ... 다음 가능한 빨리 볼륨 레벨 fader을 릴리스 한, fader은 자동화를 적용 시작하기 전에 기존의 가치가 있었더라도 다시 이동합니다.

위로 것들 재생

일단 다시 재생하여 자동화를 기록해야하는 것은 '읽기'모드로 트랙을 가하고처럼 간단합니다. 뭐든 프로젝트와 마찬가지로 다음 재생합니다 기록. 단순.

물론 래치이나 터치 모드에서 데이터도 재생하므로이 아직 더 많은 불필요한 쓰기 모드를 통해 이러한 모드를 사용하는 또 다른 이유는 것입니다 때 기억할만한 가치가.

체크 아웃 코어 로직 9 자습서 : 로직 101 에 대한 더 자동화 팁 및 유용한 정보에 대한이 블로그 튜토리얼 로직 프로 5 자동화 파워 사용자 팁 및 유용한 정보 !

Mo has been a professional in the music industry for around 15 years. He has released material with the world's leading record labels and also produces music for TV and Film. Mo is also a prolific writer and is a regular contributor to magazines such as Music Tech, Future Music and EQ magazine. There isn't a piece of music software tha... Read More

Discussion

Ben
So when would be a good situation to use write mode?

Thanks
Rounik
Hey Ben,

'Write' mode is great to use when you're 'recording' automation to a track for the first time.

Also, if you decide you wish to delete / overwrite all automation on all tracks... then use write mode! (It's safe to say I don't use write mode much!!)
Mo Volans
Hi Ben... The simple answer to your question is 'never' ;) To be honest it's only really there for legacy reasons and to tie in with controls on some dedicated control surfaces. Even the Logic manual suggests "it is only there to complete the automation modes"
Mo Volans
Haha, obviously Rounik and I disagree slightly here but he certainly makes a good point... saying that I think my 'write' mode will remain unused.
Ben
Thanks guys, very helpful!

I've been using logic through college for the past year but there's so much to learn!

Need to set aside more time for these tutorials me thinks!
Rounik
Glad you're finding these tuts useful Ben! Keep checking back daily - there's lots of good stuff in the pipeline...

@ Mo... I should've said "I don't use write mode EVER!!" Ha! Well, I'm sure I used it the once when I first used track automation in Logic and to my dismay the rest of the automation on my tracks disappeared ;-)
Peter Schwartz
I second the emotion of avoiding Write mode. I never use it. If you're starting a track and you want to write in initial volume levels, Latch is fine for that. And if you want to delete automation, there are much faster ways of doing that where you don't have to wait for your entire track to play down.
Gary Hiebner
Thanks for the great tut, Mo! Definitely be careful with write mode. Very easy to overwrite automation you may have spent hours doing.
Sullyblime
Hi Mo. If I automate the volume on a track, but then want to adjust the 'original' overall volume of the track, how can I do this while still maintaining the automation pattern?

For example, I automate a track to go up in volume that orignally started on -5. But then I decide to move the fader down to -8. But when I try that, the automation automatically snaps back to -5 every time. Thanks!

Steve
I know this article is about 1000 years old in internet years, but what is the next step? My automation is in and where I want it. Do I need to bounce tracks, bounce tracks in place, etc? Thanks.

Want to join the discussion?

Create an account or login to get started!