ロジッククイックヒント:Ultrabeatでマルチ出力ドラムの処理

Ultrabeat is a drum synth and sample player that comes bundled with Logic Express and Logic Pro 9. It comes with it's very own Step Sequencer which enables you to create patterns for each and every  

UltraBeatは Logic ExpressのやLogic Pro 9にバンドルされているドラムシンセ&サンプルプレイヤーです。それはそれの25音(声として知られている)一人一人のためのパターンを作成できるようにする非常に独自のステップシーケンサーのと、それが付属しています。各ボイスには、サンプルまたは(または、含まれている多くのプリセットのいずれかに基づいて当然の)自分で微調整が合成音にすることができます。

One頻繁に尋ねられた質問は、プラグインだけ声にエフェクトを追加する方法です....例えば、スネアだけにリバーブを追加し、唯一のキックにコンプレッサーを追加したり、ハイハットに排他的にある程度の遅延を追加することもできます。もちろん、一度領域をアレンジLogicのにパターンをドラッグし、すべてのサウンドが片方のチャンネルストリップそのチャンネルストリップの効果の=つのセットに割り当てられて順調に進んでいます。このクイックヒントでは、ロジック内側Ultrabeatのから個々の音声に処理を追加する方法に焦点を絞ります。

警告:一度これを行う方法を知って、あなたのドラムパターンが再び同じになることはありません...


ステップ1 -マルチ出力インスタンスを挿入します。

新しいソフトウェア音源トラックを作成します。今我々はそれにUltrabeatののマルチ出力のインスタンスを挿入する必要があります。これは、Ultrabeatのから自分の別の出力への経路の声にあなたをできるようになります。

クリックして、トップI / Oスロットにホールドし、メニューからUltrabeatのを選ぶ

Ultrabeatで、任意に選択したプリセットとパターンを選択します。私はデフォルトのプリセットとパターンを使用するつもりだ。

ステップ2 -を割り当てる出力

さまざまな声にさまざまな効果を追加するために、それらの声は、自分のチャンネルストリップ上に存在する必要があります。実際には私達の選ばれた声からの信号はAuxのチャンネルストリップを分離するためにルーティングされます。

これをセットアップするために我々は、Ultrabeatのボイスの割り当て領域(左側)に焦点を当てる必要があります。ここでは、、ソロをミュートレベルとパンとルーティングするそれ自身の出力に任意の音声を変更することができます。あなたはそれぞれの音声が現在のメイン出力(またはソフトウェア音源のチャンネルストリップ)に設定されていることがわかります。

私はキック1、リムショット、クラップ、ハットを閉め、私達がそれらを個別に処理できるように、補助チャネルを分離するためにペダルの帽子を(すべてのシーケンスを含む)を割り当てるつもりです。

音声と、独自の出力に選択した音声(S)を割り当てるドロップダウンメニューからメインワード(出力領域)をクリックしてください。

あなたが8つのステレオ(メイン出力を含む)と8モノラルの出力を持っていることに注意してください。


ステップ3 -補助チャネルを作成する

オープンロジックのミキサー(非表示を切り替える/すべてのプラグインウィンドウを表示するには、キーボードのVを必要に応じてUltrabeatのGUIのウィンドウを閉じたり、押すことができます)。

今、我々はにルーティングするそれぞれの音のためのAuxチャネルを作成する必要があります。あなたは、いくつかの方法で補助チャネルを作成することができます...しかし、以下の方法では、Ultrabeatがより正しいルーティングをセットアップして補助チャネルを作成するようになります。

をクリックしてください Ultrabeatのチャンネルストリップの下部にあるボタン。これは、Ultrabeatで作成された出力に設定された入力と補助チャネルを作成します。必要な限り多くのAuxチャネルに対してこの操作を行います。


優秀な!これで、Ultrabeatのからそれを別の効果でそれぞれのAuxチャネルを処理するためにそよ風ようになります別のAuxチャネルに選択した音/声をルーティングした


最終的な考え

あなたが再生するために、この時点であなたのUltrabeatパターンが好きだし、別のAuxチャネルに影響を挿入し始めるかもしれない。それは、名前をダブルクリックして、各AUXチャンネルに名前を付けることをお勧めします。さらに、それぞれのAuxチャネルのために、レベル、バランス、さらに出力にソロ、ミュート、ルート、変な追加し、素晴らしい効果を調整することができます...世界はあなたのUltrabeatのカキです!

あなたがさらに必要な場合に役立つこのまたは他のロジックやMacのソフトウェアの問題上のホームページをご参照くださいwww.macprovideo.com/forum/


Interested in learning more about Ultrabeat and unleashing the drummer inside? These tutorials will help you to become proficient whether you are starting out or looking for advanced tips, tricks and techniques! We'd love to hear from you. Let us know what you think by writing a comment below!

Rounik is the Executive Editor for Ask.Audio & macProVideo. He's built a crack team of professional musicians and writers to create one of the most visited online resources for news, review, tutorials and interviews for modern musician and producer. As an Apple Certified Trainer for Logic Pro Rounik has taught teachers, professional... Read More

Discussion

Chas
Great tip - so easy!

Thanks!
Rounik
Thanks Chas.
Glad you found it useful :)
Dominic Everson
Hi,

I've got Logic Express 9.0 on my MacBook Pro. It's going ok, but I'm a bit stuck on one thing. I think it must be something really simple but I can't find the answer on the net anywhere.

I have made patterns in ultrabeat then dragged them to the arrange window. I would like to then re open that same pattern in ultrabeat and change it slightly still using the same kit and on the same channel. After editing or creating other tracks, when I re open ultrabeat on say the Latino kit that I used, my pattern that I created doesn't come up in ultrbeat. When I play the pattern, I can see the blue keys on the side lighting up and I can see the beats in the piano roll. How can I see these in ultrabeat where the blue lights keep flashing?

Thanks
Rounik Sethi
Hi Dominic,

Once you've dragged a pattern from Ultrabeat to Logic's Arrange area you can't edit it in Ultrabeat's Step Sequencer. It's a shame... if Ultrabeat supported 'MIDI region import', I'd be so happy!! But as it is, once the region is in the Arrange the best you can do is edit it in the Piano Roll or the Hyper Editor (which once understood is a very powerful drum editor indeed!) Have you checked out Steve H's Ultrabeat Unleashed tutorial? It's the definitive place to go to learn about Ultrabeat IMHO.
Pop by the macprovideo forums also if you need any more help.

Best
Rounik
Dominic Everson
Thanks for getting back to me so quick! It does seem odd that you can't edit it where you create it. I thought that would be obvious. Nevermind! I'll check the link.
Thanks again,
Dom
Rounik
Hey Dominic,

Well, you can edit it in Ultrabeat's Step Sequencer - but think of Ultrabeat as a separate plugin outside of Logic's MIDI Editors. Once you bring it into the Arrange area then it's out of Ultrabeat's hands...

Still I completely agree, being able to import MIDI regions into Ultrabeat seems like a no-brainer. Hopefully that'll happen in a future Logic update or version!
:)
Andreas
Hi! Thanks for this tip. I am actually trying to get another instrument to work (Aria Player by Garritan) and was not able to get the panning separately for each orchestral instrument in the instance.Now it does. However, to be able to work with each orchestral instrument in an instance,I have to open that instance and select it first. Before it was enough just to select the track in the arrange window. Is there a simpler way to do this?
Rounik
Hi Andreas,

Not too familiar with Garritan Aria Player. How do you have each sound from it routed in Logic? are there 8 stereo outputs from Aria begin routed to their own Aux channels for example?

If so, then you can adjust the balance/pan on those Aux channels in the Mixer.
Andreas
Hi Rounik,
basically my problem is that I don't hear my other loaded instruments in my Aria player, the plugin instrument. How and where do I select the instrument that I want to record in? I only hear my first loaded instrument that is in the first slot in the instance, channel 1.
Rounik
Hi Andreas,

Have you inserted the Aria player on a normal Software Instrument track? This could be the problem.

Try creating a new Software Instrument track from Track > New...

This time, make sure the "Multi-timbral" option is checked.

Choose Number: 8 (for 8 stereo sounds from the Aria).

Now you'll find that 8 tracks are created in the Arrange. Each one with it's own MIDI Channels (1-8). However, they all use the same Instrument (Aria) but selecting 2nd track will playback the "2" sound from Aria, etc.

Hope this helps
Rounik
Andreas
Yes, this works, but with this setup I cannot change the panning for every track, the whole Instrument follows the same panning.
Rounik
Hi Andreas, there's two ways around this issue in Logic.

1. (as in this tutorial with Ultrabat) you need to assign the sounds / channels within Aria to an output - and then create Aux channels and use those to control and mix the different elements from the Aria player.

2. There is a method Steve H show cased in his Logic TNT2 tutorial... that uses the Environment - Once you set it up it's very cool... It's videos 18-25 in this tutorial here if you're interested:
http://www.macprovideo.com/tutorial/logic9303tnt2

Hope this helps
Rounik

Want to join the discussion?

Create an account or login to get started!