링크 및 Cubase를 리 와이어와 이유 7

Despite Reason being such a powerhouse all by itself (and with the help of some excellent Rack Extensions) there's still times you might want to ReWire it to another DAW. Hollin Jones shows how .  

그 이유는 현재 오디오 트랙을 기록 할 때 재배 이유와 Cubase를 함께 여전히 것입니다 이유를 요청할 수 있습니다? 음, 사실은 오디오 추적과 같은 기본적인 것들에 대한, 당신은 그나마 더 이상이 작업을 수행 할 필요가 있다는 것입니다. 그러나 당신이 경로 MIDI 두 응용 프로그램 사이의 오디오를 할 수 있습니다 다른 많은 이유가있다. CUBASE는 이유가되지 않습니다 비디오 지원이 있습니다. 그리고 Cubase를 캔트 중 하나를 수행하는 이유, 그 모든 사랑스러운 타사 VST 효과를로드 할 수 있습니다. 모두가 자신의 권리를 할 수있는 애플리케이션 있지만 그래서, 당신은 그들을 연결하고 데이터가 그들 사이에 흐르는 것이 아니라 인쇄를 갖는 줄기를 걸쳐 전송해야 할 수도있는 상황에서 여전히 있습니다.

1 단계 : 설정을 확인

Pic 1

당신은 Cubase를 필요로하고 모두 동일한 비트 모드에서 실행되는 이유가됩니다. 응용 프로그램 폴더에있는 응용 프로그램을 찾습니다 및 Windows에서 애플-I 또는 등록 정보를 눌러 모두에서 정보 입수. 또는 64 비트 모드 - 두 응용 프로그램이 있는지 여부를 32 먹으 렴, 같은 모드에서 열리도록 설정되어 있는지 확인합니다. 그런 다음 Cubase를 부팅 첫 번째 호스트와 슬레이브가 정확하게 확인하는 두 번째 이유 때문에.

2 단계 : 응용 프로그램을 연결합니다

Pic 2

모두가 올바르게 작동 한 경우, 이유는 ReWire를 통해 Cubases 믹서에 마스터 스테레오 출력을 전달하는 기본값 것이다. Cubase를에서, Devices (장치) 메뉴로 이동 한 이유 리 와이어를 선택합니다. 믹스 L 및 R 채널을 활성화하고 프로젝트를 재생할 수 있습니다. 이유 시퀀서의 모든 소리는 이제 Cubase를로를 통해 재생한다. 이것은 쉽게 첫 번째 이유에서 수입 할 필요없이 이유의 라이브 출력에 iZotope의 오존과 같은 마스터 링 프로세서를 사용하는 한 방법이 될 것입니다.

3 단계 : 어떤 채널을 분할

Pic 3

특정 모듈을 보내거나 좋아하는 VST 또는 AU 효과로 처리하는 Cubase를에 이유에서를 통해 추적 할 수 있다고 상상해보십시오. 이유에 가서 통해 보낼 모듈을 찾습니다. 그 뒤 연결을 볼 라운드 랙 스핀 후 대상 선택 메뉴를 표시하려면 출력을 마우스 오른쪽 버튼으로 클릭합니다. 이 메뉴에서, 하드웨어 인터페이스로 스크롤하여 활성화 할 리 와이어 채널을 선택합니다. 이 경우, (3, 4).

4 단계 : 약간의 효과를 추가

Pic 4

3, 4 : Cubase를에서 방금 선택한 동일한 채널을 활성화합니다. 당신은 이유 모듈의 출력은 이제 별도의 채널로 흐르는 것을 발견해야하고 당신은 당신이 원하는 효과를 적용 할 수 있습니다. 당신이 좋아하는 경우에, 당신은 또한 Cubase를 오디오 채널에 스트림을 기록하려면이 옵션을 사용할 수 있습니다. 당신은 당신이 필요한만큼 채널이를 반복 할 수 있습니다. 한계가 있지만, 그 한 마디가 당신에 대해 최대 실행 가능성이 있습니다.

5 단계 : 루트 MIDI

Pic 5

당신이로 Cubase MIDI 트랙을 만들고 해당 입력 선택 메뉴로 이동하는 경우, 당신은 이유있는 트랙 중 하나에서 MIDI를받을 수 있음을 볼 수 있습니다. 이 Cubase를에 플러그 - 인 장비를로드 할 수 있지만 트리거하려면, 다시 그루브와 다른 MIDI 프로그래밍 트릭, 이유 시퀀서를 사용하는 데 유용 할 것이다. 이유 소리를 트리거 Cubases MIDI 트랙에서 대상 따라서 경로 MIDI 등의 이유 모듈을 선택하여 반대를하기 위하여, 여기에서 출력 라우팅 선택에의 수도를 클릭!

Hollin Jones was classically trained as a piano player but found the lure of blues and jazz too much to resist. Graduating from bands to composition then production, he relishes the chance to play anything with keys. A sometime lecturer in videographics, music production and photography post production, Hollin has been a freelance w... Read More

Discussion

Vanhaze
Dear Hollin, great tut !!

The fact that you can route midi from Reason into Cubase, when rewired, was a complete eye-opener for me ; i never knew that !
Hollin
No problem, glad it was helpful!
Subby
i'm on windows. kindly show me how to locate the applications folder where the settings in step 1 can be checked...thanx
Robert
Can i use a masteringrack i created in reason 7.1 trough the cubase audio?
paradosis
Heyho Hollin,

I've just read your great article about linking cubase and reason 7! Especially routing midi from reason's sequencer to cubase instruments would be a stunning feature. Unfortunately I cannot get this working. Routing different reason devices to cubase and triggering them via cubase's sequencer is easy, but how to do it the other way round?

Selecting any reason device as input for a cubase-midi-track (e.g. inside the midi track assigned to Kontakt with loaded Alicia's Keys) would not create any sound. Maybe you know a great mastertrick to solve the problem and make my dream come true: sequencing inside reason and make use of some great vst instruments! Many thanks in advance!

Cheers and greetz from Berlin

P.S.: Is it a Reason 7+ feature and is Cubase 5 supported? I would immediately update any software for that.
Hollin
Hi

I'm not able to check this at the moment but if you really need to do it in a hurry, the best way might be to export the MIDI part out of Reason and import it into Cubase. Not ideal but it will work.
Rod
Step 5 of this article is misleading and should be corrected; it has raised false hope. Although the Rewire 2 specification is described as allowing for bidirectional MIDI via Rewire it's well-known that Propellerheads never implemented or enabled this feature in any version of Reason. Think about it, the lack of MIDI out before Reason 7 would not have been such a big deal if it could do MIDI out via Rewire.
Rod
Actually, MIDI controller data from tweaks in Reason can come across but I don't think note data from the sequencer comes across.

Want to join the discussion?

Create an account or login to get started!