तर्क प्रो एक्स में 32 बिट प्लग इन चलाने के लिए कैसे

Logic Pro X is 64-bit through and through without an audio unit bridge. Some users are dependent on 32-bit plug-ins like Sylenth, so in this tutorial Rounik Sethi shows how to run them in Logic Pro X.  

तो, आप तर्क समर्थक एक्स है? आप नई सुविधाओं से प्यार है और नहीं बल्कि यह तर्क 9 से प्रयोग करेंगे? लेकिन, अगर youve अभी भी तरह, कुछ 32 बिट synths मिला Sylenth नहीं कर सकते जो सेब में चलाने के 64 बिट प्रमुख काला कौवा,?

जाहिर है, आप निराश महसूस कर सकते हैं ... यकीन लेखन (64 बिट संस्करण) तर्क 9.1 के बाद से दीवार पर किया गया है कुछ साल पहले जारी किया गया था, लेकिन यह कुछ डेवलपर्स अपने प्लग इन 64 बिट के लिए तैयार करने के लिए है कि अभी तक किसी भी बेहतर महसूस नहीं कर सकता है.

आप अपने संगीत चोप्स के लिए Sylenth जैसे उपकरणों पर निर्भर अगर हां, तो आपके अपने स्टूडियो के कोने में रोना बंद करो! तर्क के बाहर में प्लग अपने 32 बिट होस्टिंग और तर्क में यह मार्ग शामिल है जो कई समाधान हैं.

अब इन समाधानों में से कुछ अपने बटुए को मारा जाएगा: VEPRO (भारी) और Plogue bidule (अधिक उचित) दो उदाहरण जा रहा है. हालांकि, ईद कुछ ए.यू. लैब मेजबान छिपा हुआ सेब का उपयोग कर स्थापित करने के लिए आज़ाद और अपेक्षाकृत आसान है, जो एक विधि साझा करना.


ए.यू. लैब क्या?

ए.यू. लैब इसका तर्क प्रो या एक और ए.यू. मेजबान है जो न उन लोगों के लिए एक मुक्त ऑडियो मिक्सिंग मेजबान आवेदन के रूप में डिजाइन अंदर ऑडियो इकाई प्लग इन (उपकरणों और प्रभाव) की मेजबानी के लिए एक शानदार अनुप्रयोग है. मैं अपनी स्वतंत्र उल्लेख किया था? इस ट्यूटोरियल youll के यहां एप्पल से ए.यू. लैब डाउनलोड करने और स्थापित करने की आवश्यकता का पालन करें:

http://www.apple.com/itunes/mastered-for-itunes/


एक बार स्थापित है, तुम भी आप पहले से ही ऐसा किया havent अगर Cycling74s Soundflower स्थापित करने की जरूरत है. यह अपने मैक पर अनुप्रयोगों के बीच मार्ग ऑडियो करने के लिए आप की अनुमति देगा. वहाँ यह करने के लिए अन्य समाधान कर रहे हैं, लेकिन मैं इस ट्यूटोरियल के लिए Soundflower का उपयोग किया जा रहा है.

यहाँ Soundflower डाउनलोड करें:

http://cycling74.com/soundflower-landing-page/


नोट: यदि आप Soundflower youll अपने मैक पुनः आरंभ करने की आवश्यकता है स्थापित करते हैं, तो आप इस पेज को बुकमार्क और इस ट्यूटोरियल जारी करने का अधिकार वापस आने के लिए सुनिश्चित करें!


चरण 1 - ए.यू. लैब की स्थापना

ए.यू. लैब लॉन्च! आप इसे अपने आवेदन / उपयोगिता / फ़ोल्डर (या इसे खोजने के लिए और शुरू करने के लिए विशेष कार्यक्रम का उपयोग) में रहने वाले का पता लगाना चाहिए.

शुभारंभ पर itll उपलब्ध ऑडियो इकाइयों के लिए अपने सिस्टम को स्कैन और आप नीचे विन्यास खिड़की देखें.

The defauly configuration window in AU Lab.


हम जारी रखने से पहले कदम वापस देता है और हमारे यहाँ उद्देश्य क्या है के बारे में सोचते हैं. आदर्श रूप में, हम ए.यू. लैब हमारे 32 बिट (बीमार 32 बिट का डेमो का उपयोग किया प्लग - इन होस्ट करना चाहते हैं Lennar डिजिटल द्वारा Sylenth ). तो फिर हम हमें यह करने के लिए मिडी नोट डेटा भेजकर Sylenth ट्रिगर करने के लिए सक्षम हो जाएगा जो तर्क प्रो एक्स में प्रासंगिक पटरियों बनाना चाहते हैं ... और तर्क (ताकि हम इसे खेला जा रहा है सुन सकते हैं) में ए.यू. लैब से ऑडियो आउटपुट प्राप्त होता है.

मन में है कि, मैं कोई नहीं करने के लिए ए.यू. लैब में प्रारंभिक ऑडियो ट्रैक के इनपुट सेट और Soundflower (2 चै) के लिए ऑडियो आउटपुट सेट करने के लिए जा रहा है.

Make sure to set the output to Soundflower (2ch) and not built-in output or your audio interface's outputs.

उत्पादन या आपके ऑडियो अंतरफलक है outputs में निर्मित Soundflower (2 चै) के लिए निर्धारित उत्पादन और नहीं करना सुनिश्चित करें.


दस्तावेज़ बनाएँ मारो.


चरण 2 - एक 32 बिट साधन डालें

एक ऑडियो चैनल बनाया, लेकिन हम नहीं कर सकते मेजबान प्लग में वहाँ, ऐसा चुनाव एक साधन संपादित किया गया है

साधन पॉप अप मेनू से प्लग में अपना पसंदीदा चुनें. Youll को अब इम Sylenth1Demo को सीधे जाकर पता है!

Choose the 32-bit instrument of your choice.

अपनी पसंद के 32 बिट साधन चुनें.


अपने प्लग में खुल जाएगा और आप अपने मिडी कीबोर्ड के साथ यह ट्रिगर कोशिश अगर आप आगे बढ़ चैनल पट्टी पर स्तर मीटर देखना चाहिए.

हालांकि, अगर आप किसी भी ध्वनि सुन नहीं होना चाहिए. हम अभी तक एक गंतव्य उत्पादन नहीं है जो Soundflower के माध्यम से ऑडियो आउटपुट सेट इसका कारण यह है. अपने अपने आंतरिक वक्ताओं या ऑडियो इंटरफ़ेस से बाहर आने नहीं अर्थात्. खैर कदम की अगले कुछ में तर्क है कि निर्धारित किया है.

Sylenth in AU Lab.

ए.यू. लैब में Sylenth.


चरण 3 - तर्क प्रो एक्स में बाहरी मिडी सेटअप

लॉन्च तर्क प्रो एक्स Ive एक खाली परियोजना बनाया है और अधिक महत्वपूर्ण बात यह एक बाहरी मिडी ट्रैक बनाया. खैर Sylenth को गति प्रदान करने के लिए इस का उपयोग करें.

Create an External MIDI track.

एक बाहरी मिडी ट्रैक बनाएँ.


लाइब्रेरी खोलें और Sylenth1Demo का चयन

Set the correct MIDI output for the channel in the Library.

लाइब्रेरी में चैनल के लिए सही मिडी उत्पादन सेट.


अपने मिडी कीबोर्ड पर एक नोट खेल अब ए.यू. लैब में Sylenth गति प्रदान करना चाहिए! फिर, बस अभी तक कोई आवाज नहीं ... अच्छा है कि अगले के साथ सौदा.


चरण 4 - ऑडियो वरीयता सेटअप

अब हम Soundflower (2 चै) करने के लिए सेट जो ए.यू. लैब्स उत्पादन से इसकी ऑडियो इनपुट प्राप्त करने के लिए तर्क बताने की जरूरत है. तो, चुन: तर्क प्रो एक्स

उपकरण टैब से, Soundflower (2 चै) को इनपुट डिवाइस बदल सकते हैं और अपने ऑडियो इंटरफेस करने के लिए अपने आउटपुट डिवाइस सेट रखना. तुम भी सॉफ्टवेयर निगरानी जाँच की है सुनिश्चित करने की आवश्यकता होगी.

Set the Audio Input in Logic to Soundflower.

Soundflower को तर्क में इनपुट डिवाइस सेट करें.


परिवर्तन लागू करें पर क्लिक करें और फिर वरीयताएँ विंडो बंद करें.


तब और आवाज़ थी - चरण 5

ए.यू. लैब से ऑडियो आउटपुट प्राप्त करने के तर्क में एक वस्तु बनाने के लिए है सफलता के लिए अंतिम कदम (किया youre! कब और कृपया एक टेम्पलेट के रूप में यह बचा है). हम और अधिक आसानी से ऑडियो को Sylenth रिकॉर्ड कर सकते हैं तो हम एक औक्स चैनल बनाने, लेकिन इस उदाहरण आईडी के लिए एक ऑडियो ट्रैक बनाने के लिए पसंद करते हैं सकता है

ट्रैक चुनें

The Input Format button and Input slot can be found towards the top of the channel strip in the Mixer or the Inspector.

इनपुट स्वरूप बटन और इनपुट स्लॉट मिक्सर या इंस्पेक्टर में चैनल पट्टी के ऊपर की ओर पाया जा सकता है.


आपको लगता है कि ट्रैक पर ए.यू. लैब से आने वाली ऑडियो संकेत सुन सकते हैं तो ऑडियो ट्रैक हैडर पर इनपुट निगरानी बटन पर क्लिक करें.

आप कमांड कश्मीर या विंडो का उपयोग कर जोड़ा, पॉप खुला Logics कुंजीपटल एक मिडी कीबोर्ड है न, अगर आप विदेश मिडी ट्रैक चुना है और यह सुनिश्चित करें

कुछ नोट्स मारो और आप तर्क प्रो एक्स में Sylenth खेल होना चाहिए! तुम सिर्फ बाहरी मिडी हार्डवेयर का उपयोग करते समय आप की तरह अपने ट्रैक करने के लिए मिडी रिकॉर्ड कर सकते हैं ... इसके अतिरिक्त आप ट्रैक हैडर चयन और रिकार्ड मार से आपके ऑडियो ट्रैक करने के लिए ए.यू. लैब से उत्पादन में रिकॉर्ड कर सकते हैं!

Bliss! You're in Logic Pro X and you're now able to play your 32-bit synths, record the patterns as MIDI and record as audio.

परमानंद! आप तर्क प्रो एक्स में हैं और अब आप अपने 32 बिट synths खेलने मिडी और ऑडियो के रूप में रिकॉर्ड के रूप में पैटर्न रिकार्ड करने में सक्षम हो.


यह उनकी 64 बिट संस्करण उपलब्ध हैं से पहले आप अपने पसंदीदा synths और प्रभाव का उपयोग कर रखने के लिए एक उपयोगी वैकल्पिक हल है. ओह, और ए.यू. लैब में अपनी सेटिंग को बचाने के लिए और एक टेम्पलेट के रूप में अपने तर्क प्रो एक्स परियोजना को बचाने के लिए याद है.

Youve नीचे टिप्पणी में हमें बताओ तर्क प्रो एक्स में 32 बिट प्लग इन का उपयोग करने के लिए मिला अन्य तरीकों के बारे में पता करने के लिए रुचि रखते थे.


Rounik is the Executive Editor for Ask.Audio & macProVideo. He's built a crack team of professional musicians and writers to create one of the most visited online resources for news, review, tutorials and interviews for modern musician and producer. As an Apple Certified Trainer for Logic Pro Rounik has taught teachers, professional... Read More

Discussion

Gary Hiebner
Excellent tip Rounik! Now don't have to feel so lost in Logic X without Sylenth.
Jonathan
Great tip - thanks Rounik.
Is there any way to get Sylenth to sync to the tempo of Logic using this method?

Thanks
J
Rounik
Thanks Jonathan!

Actually, I'm not really a Sylenth user (hence my use of the demo version in the tutorial!), so I didn't even think of it.

I'm not sure if it is possible to tempo sync using AU Lab ... hmmm, perhaps Mainstage or JBridge would work better for that.

:)
David
Man, this is a lot of work to get old tech to work with new tech...

I'm sure theres plenty of 64 bit plugins that are just as good (or better) than the old 32 bit plugins that the 3rd party developers seemed to have abandoned?

personally, i'd feel uncomfortable using any software where the last update on their website was in 2009 o.0

Thanks for posting this, but I hope that LPX will mostly get people to move forward :-)
Jonathan
OK - I didn't know you could do the same trick with MainStage...?
Thanks J
Pond
This is *identical* to the approach I posted about on Apple's Logic Pro discussion forums several days ago:

http://discussions.apple.com/thread/5176726

...except the author doesn't mention any of the downsides, not least AU Lab instability and overall latency.

As far as sync etc. goes - this treats your software plugin as an external MIDI instrument, totally independent of Logic as if it were sitting its own metal box in a rack somewhere.
Rounik
Hi David,

It seems like more work than it is... but I agree with your sentiment.

I personally prefer to work with as stable a setup as possible and therefore am sticking with 64-bit plugins mainly with Logic Pro X.

I really wrote this for the benefit of some friends who use Sylenth and are waiting for it to become 64-bit. I only see this method as a workaround - not an everyday solution for using multiple 32-bit plugins in LPX :)

I really hope most devs update their plugins soon to 64-bit so we can all move into the 64-bit future with no more baggage ;-)
Rounik
Hi Pond,

I've answered your post on the Apple Discussions forum too.

Once again, thanks for your observation. Great to know you cam up with the same solution. It's no surprise that 2 or more users can come up with this...

I've been using Soundflower and building complex Logic Environments for years - learning and teaching Logic... so that you came up with a similar/same solution would suggest that great minds think alike? ;-)

Thanks for posting your comment here :)
Pond
I just thought it was worth pointing out that there are stability and latency implications. Some AUs make AU Lab crash outright and Soundflower has been prone to hiccups/dropouts IME ever since Lion.

If only there was a decent Rewire-capable AU host at low/no price then that'd allow for deeper integration at lower latency.
Lung
Rounik, is there any benefit to using AU Lab as opposed to MainStage? I've been meaning to try MainStage 2 since it's already on my hard drive but just haven't gotten around to it yet. In any case, how's the latency if not negligible? I won't be using Soundflower but actually the front end mixer that comes with my audio interface to route audio by the way, for what its worth. So figures may be different.
FrankSalvato
Brilliant! It's plain to see that MPV is quickly on it's way to be THE place for those serious about music Production with Logic Pro.
Daniel Brourman
Could you show us how to automate Sylenth using this method? I want to upgrade to Logic Pro X but I use Sylenth a lot and I'm wondering if automating will be more difficult and slow my work flow down.

Rounik
Hi Lung,

The only benefit I can think of is that AU Lab is free and MainStage costs a very very reasonable amount! So, my tip here is designed to be completely free (as in free lunch!) but certainly Mainstage is an excellent way to go too. I also feel AU Lab is more streamlined and easier to setup for those that don't know about MS.

Yes, Soundflower can introduce some latency into the process. From my tests it's pretty minor, but for other "serious" players it could be a deal breaker. Routing through your interface should give better results!! Let us know :)
Lung
Thanks for the answers, Rounik!
Rounik
Thanks Frank! We aim to please :)
Rounik
Hi Daniel,

This is really a workaround - so it's not perfect or ideal for the long haul. It's also a free technique...

I'd suggest checking out JBridgeM (VST only host) which costs around $10 I believe. I haven't had time to try it but it could be possible to automate parameters there. Good luck and let us know if you have any success.

putte
Thanks a lot for this well explained workaround.

What I don´t get yet is how to make use of my effects using this method? I´d be happy fpr hints. :)
putte
To be more precise:

Is there a way to simply add 32-bit effects to my audio tracks?
gabriel jung
hello it works fine! Is it now possible for me to get it play some of my logic pro 9 profects where i used slenth1 aswell! greetings from germany
Rounik
Thanks putte! To be honest I haven't properly tried using 32-bit audio fx in LPX. It's more complex really and I think would require a much more complex workaround.

Personally, I'd load up Logic Pro 9 or another 32-bit capable DAW and run them there.
Rounik
Hi Gabriel,

Glad it's working well for you.

Unfortunately, that won't work because Logic Pro X can't directly host 32-bit plug-ins and there's no way I know of for AU Lab to know the settings of Sylenth from a Logic 9 project.

If you're in any way heavily reliant on 32-bit plugins as used in a previous project I'd recommend still using Logic Pro 9 for those projects.

The good news is: I've heard on the grapevine that Sylenth 64-bit is being worked on as I type...

:)
gabriel jung
Ok thank you very much anyway!I already started finishingmy old projects with logic 9
Utopian 811
I would like to suggest the VEPro method. It's very easy to use, syncs, and while it costs a few $$$ the included "Epic Orchestra" library is a pretty good basic sample library that can be used with awesome results.

That and the big plus that it takes the issue of Logic's CPU balancing (or lack of it) and lets you optimize your computers power.

This used to be a so so app a few years ago, but in the last year has become the best option out there for either using multiple computers for sample library use for composers or if you just wanna use any older computers or something like a Mac Mini as synths...

George Leger III
www.georgetechguru.com
Gavin Kurves
Excellent work Rounik..
Rounik
Hi George,

I agree. The VEPro method is preferable, more reliable and useful...

But most people seem to be looking for a free solution/workaround to tide them over. Definitely VEPro would be a good investment if the user is serious and able to open their wallet ;-)

Best,
Rounik
Rounik
Thanks Gavin! :)
gabriel jung
Although its working Im still hoping for a 64bit version.It would just make things so much easier!
Rounik
Hi Gabriel,

I agree 100%... and there's some good news from Lennar Digital released today:

http://www.lennardigital.com/modules/home/

From the Lennar Digital website:

"23 July 2013
Recently we receive a lot of questions about how to run Sylenth1 in 64bit hosts on OSX, such as the new Logic X and Ableton Live 9. We are still working on a 64bit version of Sylenth1 and we're hoping to get it done before the end of this year. Until then there are a few options to run Sylenth1 in these hosts. You can find an example walkthrough here (links to this page).

For Ableton Live it is recommended to use the 32bit version of Live to run Sylenth1. If you still need the 64bit version, you can use JBridge to run Sylenth1. "
gabriel jung
Made my day !!! :)
Juan Zambrano
Thank You very much for this tutorial, A Life Saver !!!

I have only been able to play one instance of Sylenth on my Logic Pro X, whenever I try a second track, it all goes OMNI, so I hear the same performance with the different channels,
Is there a way to have more than one Channel?
Juan Zambrano
EDIT:

I was able to play different instances of Sylenth on different tracks by changing de different instance's MIDI channels in the MIDI editors on each instance ( Upper right corner ) inside AU Lab's documents, but MIDI Channel 1 Can't be used, whenever I try to use MIDI Channel 1 it goes into OMNI mode,
Using MIDI Channel 2 and above I was able to play several instances of Sylenth on one document...
I don't think this is really the best way, but it seems to be working...
Johnny
I understand some users have used Jbridge and maschine, can some give a walkthrough on how to do this? I have both and I'm struggling and poor Joao at Jbridge is being very helpful but we haven't got round it yet for my mac, just wanna make sure 'm doing it right

Johnny
Jimi B
Is there any way to run Superior Drummer in logic pro x? I just got it days before LPX launched, and I'm new to both. Any suggestions?
Leon
I tried this method and I can get sound coming through the Audio channel but not the MIDI. I have an old project which I converted to MIDI data and opened on Logic X and I need to add a 32 bit AU to it, any idea what I did wrong?
Rounik
Hi Jimi B, sure! Superior Drummer 2 is 64-bit compatible so it will appear in the Instrument drop-down menu on a Software Instrument Channel strip :)
Jimi B
Got it... Thanks Rounik, best of both worlds! SD & Drummer work well in LPX.

Thanks for the prompt response.
Rounik
Hi Leon,

Try it in a new Logic Pro X project, maybe restart AU Lab too...

Hope it works for you.
Thanks for the run down on that
I have to use software like this for a living it's really bull&#@t that it doesn't run 32bit 3rd party plugs, the work around is so much of a pain in the ass that I'm really reluctant to move forward with this version. I've been with Logic since 8 and I'm beyond frustrated that this simple compatibility service hasn't been added to this version. I live in 3rd party plugs and I'm not interested in performance and latency issues or having to run soundflower or and AU Lab work around's. In short; if they don't figure out better 32bit support then Logic X can go eat **************. Logic Pro 9 is great, and if it ain't broke...... Don't fix it.
Utopian 811
Hi Rounik,
I did a tutorial that is on You Tube about using Logic Pro X and VEPro 5 together to run 32 bit plug-ins. Can I post the link here so people can see the difference in running the AU Lab VS VEPro, or would you prefer I start a new topic (which I might have already done).
Since it seems like the topics are related, and that the VEPro method is much easier (though more costly) and I think people would want to see just how easy.
Thanks
George Leger III
AKA George Tech Guru.

BTW I have no affiliation or connection with the people at VSL. I bought and paid for their software that I'm using for this tutorial. Also, if you do buy VEPro, you will get the "Epic Orchestra" sample library free with it. This is a 3 GB sampled orchestra, simple to use, and fantastic sounding, a great addition to ones sample collection.
Rounik
Hi Jimi B, glad to hear it :)
Rounik
Hi George,

Sounds like a good new thread for the macProVideo.com Logic forums :-)
Utopian 811
Done... If anyone wants to see my video on Logic Pro X and VEpro running Sylenth, cheak out the link in the post I did about it...

Thanks,

George
Au Labs
Thanks for the info, The AU labs crashes on my system while validating plugins.
Andres
Thanks for the great tutorial! But how do you automate synth parameters in Logic Pro X?
If someone can answer to this question, I'd appreciate that! :))
don salmon
hi, this workaround was great for getting Miroslav Philharmonik (a 32 bit plug in for now - supposed to be updated to 64 by the end of the year) to work in Logic X.

I'm still having trouble getting two different MIDI sounds at the same time. I've been fiddling around with different channel assignments in both MIroslav and Logic X.

I can do another workaround - I can record each track as an audio track, but that way I don't get to hear what the various sounds are like together before the audio recording.

Anyway, if anybody knows how to deal with this, I'd really appreciate it.

(or, heck, I'll just do the recording in Logic 9!!)
CHRONOJAZZ
Hi Rounik,
thx so much for the workaround,tremendously helpful..
have hit a slight snag tho...
i'm trying to get Xln's Addictive Drums to work
with a midi kit but it wont trigeer on any midi channel..
it plays the demo audio fine with the AU Lab workaround
but i cant seem to get it to trigger from either a midi kit or a keyboard controller...the kit and keys are triggering the new LPX kits just fine, but not AD..
All midi channels have been tried and the midi is going in ,but in the tutorial when is says i should see the channels show the kit sounds without hearing them ,they aren't being triggered.
Any help/ideas most welcome...
On the upside i can now trigger RMX kits from the midi kit which i couldn't do in LP9..Which is nice..
Cheers, i've just found this forum and it's excellent.
Thx again,
-CJ
Rounik
Hi ChronoJazz,

No problem at all :)

Unfortunately, I'm not familiar with Addictive Drummer. Have you setup each track in Logic to its own MIDI channel? hmmm... not too sure I'm afraid.

I didn't consider multi-instruments when writing this tutorial. If you find a solution do let me know.

I'll have time to take a look over the weekend maybe. If I discover anything I'll let you know... though, a better solution to using AU Lab and Soundflower would be VEPro (a few hundred dollars) - it can run 32-bit plugins in Logic Pro X... and I believe it'll work a lot better.

Another author has written about this recently... so stay tuned to macProVideo as we'll publish it in the coming days.

Best,
R
Utopian 811
FYI Addictive Drummer IS 64 bit now. Just download the latest version at the site.
henkx
Hi Rounik,

thank you very much for your contribution!

I tried to run Steinbergs virtual guitarist, I get sound, but the plugin won't play as it should, you can hear only the first chord but no groove follows. After a few moments the first chord can be heard again and so on.

In this discussion Main Stage was mentioned: Do I need version 3 or could do version 2, delivered with Logic Studio, do the job?

Itried to connect Main Stage 2 and Logic X, but it did'nt wor so far.
If someone could give me a hint, I would be very glad.

Best wishes
henkx
henkx
Hi there,

finally I got it to work with MainStage 2, seems to be ok far now.

One thing I always wanted to know: If I want to use Vienna Ensemble, it has to be Ensemble Pro?

With the VSL Special Edition there came the Ensemble, but I only could create instances with Vienna instruments.

Best regards
henkx
Joar
Henkx, how did you make it work with MainStage? I've got MainStage 3 but I'm guessing they're similar enough. You don't have to make an tutorial as detailed as the main article here, but just some steps would be wonderful!

Thank you!
Utopian 811
Yes you need Vienna Ensemble Pro to use it as plug-in host.
Komplete 8 Ultimate on Logic Pro
Hi guys,

I came here looking for a solution, when I realised my Komplete 8 Ultimate sounds disappeared from Logic Pro X. Just to confirm: Is the issue people are encountering got to do with Logic ProX not detecting Komplete 8 at all? Or is it that Komplete 8 fx don't work? I use Komplete 8 Ultimate and at first I had a hard time finding it on Logic Pro X. But now, I got a way out. But I have to tested that all the plugins work.
bobdemaa
I'm wrapping up a couple of days worth of working on a 32bit interface that is reliable. I mainly need to insert a couple of plug-ins that are still 32 bit, but like working in Logic X for the most part.

AU Lab for whatever reason does not like FLUX plug-ins, and AU lab seemed a little crash, had to bail on that.

Tried Vienna Ensemble Pro, but there's too many hoops to jump through and my ability to get audio to just consistently pass through like a plug-in would just wasn't happening for me. It's likely that the intention of VEP is meant for slightly different uses than I need.

I decided to give RAX a try, from Audiofile-Engineering. They've made some great improvements on this application which I hadn't tried since many years ago. It's been working great and lets me use Logics I/O plug-in to get in and out of it which I prefer for my workflow.

Rax also has the added benefit of VST support. It also looks like it has Multichannel support up to 8, I may have to try that with surround mixes from Pro Tools where I'd like to use some VST's...

As with all things, YMMV, but this seems a good solution for now.
G.F. Big
Hi Rounik,

Thanks for the tip. Is it possible to run instances of, say, Miroslav and Sonik Synth 2 in the same project via this method?

Thanks,

G.F.
Rounik
Hi G. F.

I think it'll be tricky to set up with this method...
However, stay tuned to:
www.askaudiomag.com
in a few hours from now we'll publish an article on running 32-bit plug-ins (multiple ones too) in Logic Pro X using VEPro.

:-)
G.F. Big
Thanks for your reply, Rounik. VEPro costs mucho pesos, non?
Rounik
Hey GF,

Admittedly is does cost... seems to be about 150 Euros (probably about the same in dollars).
http://www.vsl.co.at/us/211/497/537/1456/1083.htm

But, a few of our authors tell me you get a lot of bang for your buck with it... lots of excellent features and sounds. Also, looks like a very efficient way to run 32-bit plug-ins in Logic Pro X.

:)
G.F. Big
Again, Rounik, thanks. In looking around for this software, am I missing something when I see that it is only a host for sample libraries bought separately, or does it have its own instruments?
Rounik
Hi G. F.,

Oops. My bad... so yes, if you get VE Pro you get a 9 GB collection of high-quality samples:
http://www.vsl.co.at/en/211/497/1685/1990/2016/1703.htm

And, yes, that means the price creeps up too... though if you're already in the market for orchestral samples I've heard it's a good buy!

We'll be publishing the article on using VE Pro to host 32-bit plugins in Logic Pro X on Monday (tomorrow)... so take a look through the steps (very few involved) to get a sense whether it's the route you'd like to take.

Best,
Rounik
Utopian 811
Well, there is a tutorial that goes through the VEPro/Logic Pro X 32 bit plug-in setup here:

http://www.youtube.com/watch?v=N18kLZMo_2o

George
Rounik
Hi All,

We've just published our article on using VEPro to host 32-bit plugins in Logic Pro X (you'll find it here at macProVideo.com) or here at AskAudioMag.com:

http://www.askaudiomag.com/articles/how-to-run-32-bit-plug-ins-in-logic-pro-x-using-vienna-ensemble-pro

Thanks!
scottyv
I recently completed this and got everything working ,thank you. The only issue I have is when i add another software track, sylenth still plays when i use my midi controllers on other instruments? Any ideas on how to fix this?
JonStranks
I'm completely new to logic and I'm having trouble.. I've followed all the steps and when I play on Logic's keyboard It's lighting up the bar but no sound is coming out?

I think It might have to do with Step 5, where you're meant to set the Input Format button to Stereo because I couldn't work out how to do it, thanks!
JonStranks
I'm also having trouble saving it as a template, it comes up with, 'Please choose a location in the template folder or one of its subfolders!'

Thanks
Rounik
Hi JonStranks,

In other projects do you have sound coming through? Have you set your Audio Device for input and output correctly in the Logic Pro > Preferences > Audio window?

Is the channel strip for the track setup correctly with its output and input?

In terms of setting the stereo format button/input for the audio track click on the track header and in the Inspector on the left is its channel strip. Next to "Input" you should see a circle (mono) or interlinked circles (stereo). clicking on this button will toggle the input type between the two. Clicking on the word "Input" will allow you to set the input for the audio channel.

Hope this helps.

And regarding templates, simply choose File > Save as template...
Choose a name and make sure the location is set to:
Users/~/Music/Audio Music Apps/Project Templates/

:)

P.S. I'd highly recommend checking out the Logic Pro X video courses here to help you master Logic quickly:
http://www.macprovideo.com/logic
Lorenzo
I got it to work except for one thing.

I imported a midi clip from Ableton, to use in Logic. When I play the keyboard, the audio plays through just fine. However, when I add the midi clip to the same track and hit play, no audio comes through. Is there a way to fix this? I would love to be able to edit and humanize this midi performance in Logic instead of exporting an audio track from Ableton.

Thanks!
Rounik
Hi Lorenzo,

That sounds like a different issue.

Have you tried importing the MIDI clip to a different software instrument track in Logic?

It should work fine as long as it's on the correct track (i.e. not on the audio track).

:)
Lorenzo
I got it to work. I'm not sure why this worked but disabling the "record enable" on the external midi track allowed the audio to pass through once the midi clip was placed on the track.

On a separate note, it seems unfortunate that I cannot record audio while this reroute occurs, since I have to change the input to my audio interface. I guess that means I will need to bounce the track down to an audio file first, which isn't a huge deal.

Thanks for the work-around! This saved me a lot of time.
Jesus
Hello, so i have Logic Pro 9 and recently download Logic X, i did everything what here says and it worked, but now i want back to use the Logic 9, so i opened logic 9 and neither Sylenth Or Nexus appears on plugins. Can someone help me please.
David J
Hello,

Thanks for this tutorial. I'm having problems with hearing sound...

(FWIW I'm an relatively experienced Logic user - at least of the previous versions :-))

I can see the signal on the MIDI channel, and when I hit the keys on the plugin (Sylenth) within AU Lab I can hear sound, but when I'm back in LPX, nothing.

Can someone help ?
sylenth
I think that the people from syleth 1 are being lazy and slow on the 64 bit version .it use to be my main synth now i use nexus 2 because they got good sound and is 64 bit without having to jump a bunch of hoops sorry lennar but i was looking forward to silent 2 64 bit and with other much needed improvements. i still love how it sounds so hopefully soon
DaveColeman
I am pleading for a similar tutorial how to run 32-bit effects via Aux Channel!!!
Thank you!!!
Joar
Hi!

Great tutorial! I'm new to logic and I think I'm missing something though. I can only hear the audio from the VST when the audio track is selected. When I select the midi track to record something in midi I hear no sound and have a hard time playing without hearing myself. I tried to trigger record on the midi track while selecting the audio track but then the Input Monitoring turns off.

Additionally, since AU Lab lacks stability and has bad overall latency as some user previously pointed out I would like to use MainStage instead. However, I've never used it before and would need help with that. Is it possible to make an additional tutorial for that? That would be great! :D

Thank you!
Frankie
Hello, I have recently installed Logic Pro X and OS X.....and now I have problems working in rewire mode with Ableton 9(32bit)....if I open them in rewire they are not in synch any more and the audio comes out only from Logic and not from Ableton...:(
is this problem made becouse i'm running a version of Ableton at 32 bit? and Logic Pro X in running at 64bit?

Can anybody give me helpppp...:D
Rick404
I have a slight problem I hope someone could help me with. I've followed this tutorial and don't believe I missed anything, but I only get sylenth sound when I press with my mouse on the sylenth plugin inside au lab. But in Logic Pro X, midi notes don't trigger the sylenth in au lab. How can I check to make sure the midi track in LPX is routed correctly to AU Lab?
hira
hi

I'm having the same problem u describe & was hoping u figured out a solution?

cheers
Rounik
Hi Rick404,

Check the steps once again and make sure you have the MIDI channel set up in Step 3 that corresponds to the MIDI channel in AU Lab/Sylenth. This should work...

Best,
Rounik
Rick404
Thanks for replying Rounik. I just went through it all and double-checked my settings. If I do a screen recording video of me going through the steps, would you be willing have a quick look to see where I'm going wrong?
Thomas
Hi,

If I open up Logic Pro X, I can't see sylenth1 or any other AU-lab inserted plugin. I've done all the steps correctly

Thanks
Matheus Bellini
Hi, I'm having exactly the same problem of Rick404. I've done all the steps over and over again (specially Step 3) and I can't hear anything in Logic - I can just hear it in AU Lab.

Here's a screenshot with my setup

[IMG]http://i39.tinypic.com/2qkjn8j.png[/IMG]

(I've also tried with Sylenth, but had no sucess too.)

=;(
Rounik
Hi Matheus,

Sorry to hear this. Have you tried restarting your Mac and using a new blank project in Logic Pro X?

Also, can you provide a few details. e.g. the version of Logic Pro X you're running, OS X and any details about audio interface/MIDI keyboard/your Mac, etc.

Thanks!
R
Francis 7
Hi, in trying to run AU Lab I've run into an old, annoying, problem. It keeps crashing because of Native Instruments' B4 plug in. It's no longer supported. I followed their answer in deleting it but I still get the error message

B4 II: Still no tonewheel files found! Please install the B4 again.

Is there a way around this, or to get rid of B4 completely (I trashed the file in Applications as well as the plist in Library)

thanks,
Francis
Paul W
Hi there

Thanks for the article. Unfortunately, after following your instructions to the letter, I cannot get Sylenth to work.

The external MIDI track with Sylenth loaded is receiving an input as every time I touch my MIDI controller I can see signal coming through but cannot hear anything through the input-enabled audio channel.

I am using Logic X on iMac 2013 FD OS 10.9.1 with NI KA6 sound card (with Soundflower set as input in Logic X settings).

Best wishes

Patrick
Rounik
Hi Paul,

hmmm... sorry to hear that. Do you have auto-punch mode enabled? Try turning it off.

Also, make sure the audio channel strip's output is set to Stereo.
Don Salmon
Hi folks,

I don't know if anybody here has tried it, but "32 Lives" works like a charm. It took about 5 minutes for the whole process and now the old 32 bit Miroslav Philharmonik shows up in Logic Pro X just like my 64 Real Guitar and Garritan plug ins. After the first download and set up, there's absolutely nothing more to do.

Let me know if you try it - I hope it makes it much easier for you.

Don Salmon
www.remember-to-breathe.org
DaveColeman
Thank you Don Salmon for the preciou$ information! Here is the URL to the relative site: www.soundradix.com/products/32-lives
A trial version is also available. ;-)
Don Salmon
Sure. And the trial version, is, of course, free.

I forgot to mention it's only $99 (yes, I paid several hundred dollars last September for Vienna Pro, which worked ok for awhile - I still found it annoying to have to set it up each time I wanted to use Miroslav - but then just stopped, and neither the Vienna Pro folks (who said it must be a Miroslav problem) nor the IK Multimedia (Miroslav) folks would help.

And yes, if you have any doubts, get the trial version. It's kind of funny- your old 32 bit plugin will work fine for about 20 seconds, then suddenly the image will start to fade and you won't get any sounds. Wait a few seconds and it comes back, and you can try out your sounds again for another 20 seconds or so.

I found that using the trial version for about 20 minutes was enough to convince me to buy it. I bought it right away, set the whole thing up, and I've been having a blast layering Garritan, Miroslav and Logic sounds ever since!

Don't hesitate - if you have had any trouble with 32 bit in Logic X, get the trial version right away. I doubt if anybody, after using the trial version, will hesitate to get the real thing (and in case anybody wonders why I'm so enthusiastic, no, I don't have any connection with the makers of the product. It's just really that great and such an incredible relief not to have to bother with all the other measures)
Ben
Hey thank you so much for this article! Been looking for a while online for a solution. Well I followed all the steps and have sound coming out when I click keys on sylenth on aulab but can get sound to come out of logic.
Andre
Good Morning! Thank you so much for this tutorial! I only have one small problem ...... when I press rec ,Logic record only the audio track and not the midi ...... can you please help me? Thank you very much :)

Ho già provato molte volte a ripetere i passaggi per essere sicuro di aver seguito alla lettera le tue istruzioni!!

Andre
After a lot of trial ...... I solved it! Thanks anyway :)
tim
Hi Rounik,
Do I follow the same process if I already have an Aggregate device setup in my AMS? I was thinking the Aggregate device might replace AU Lab or Soundflower?
CtoW
How would i be able to use this with a AU like Autotune Evo? I have autotune evo on my logic pro 9, but it wont open in logic pro X because its 32 bit.
Stan
Hello Rounik,

I have done literally everything you summed up in your article, but I don't get any sound through my speakers. My volume bar is going in AU Lab, FM8 (Which I'm using here) and Logic Pro. Can you help me?

Thanks anyway.

Want to join the discussion?

Create an account or login to get started!