उत्तम तर्क प्रो में कैसे बस चैनल का उपयोग करें

Logic is infamous for its complexity as well as its flexibility when it comes to routing. In this quick tutorial, Master Logic composer and trainer Peter Schwartz delves into the dark side of Busses.  

चैनल पट्टी का एक प्रकार है कि अच्छी तरह से अनुभवी तर्क उपयोगकर्ताओं के लिए जाना जाता है, लेकिन शायद रिश्तेदार नए लोगों के लिए इतना नहीं मौजूद है. और इस चैनल पट्टी पर्यावरण में जा रहा है और ... अब एक दूसरे इंतजार की तुलना में किसी अन्य माध्यम से नहीं बनाया जा सकता है. क्या आप इस लेख से दूर क्लिक करें के बारे में है क्योंकि शब्द "पर्यावरण" तुम डर के साथ भरता है? खैर, मैं आप में एक रहस्य पर हूँ: क्या आप जानते हैं कि प्रत्येक और हर बार जब आप आप पर्यावरण के साथ काम कर रहे हैं एक तर्क परियोजना बनाते हैं?

हाँ, यह सच है. चैनल स्ट्रिप्स आप निरीक्षक और मिक्सर पृष्ठ में देख सभी पर्यावरण "वस्तुओं" हैं, के रूप में वे आधिकारिक तौर पर कहते हैं. सभी प्रकार (plugins और बाहरी मिडी) और auxes के उपकरण पर्यावरण वस्तुओं भी हैं. और यह एक विशेष वस्तु, बस चैनल है, जो तो अत्यंत उपयोगी है कि यह कम shrift नहीं दी जानी चाहिए सिर्फ इसलिए कि तुम (अपने आप को ब्रेस) पर्यावरण में जाने के लिए उन्हें बनाने के है. वास्तव में, यह काफी करना आसान है. तो कृपया, पर्यावरण खिड़की खोलने के लिए, एक गहरी, आराम साँस ले, और पढ़ने के लिए बाहर खोजने के लिए कैसे बस चैनल बनाया जाता है होने के बारे में सोचा पर अपने माउस में अपने नाखूनों खुदाई बंद करो, के रूप में के रूप में अच्छी तरह से प्रकार में कुछ अंतर्दृष्टि पाने के लिए वे नियंत्रण से प्रदान करते हैं.


दानव बनाना

पर्यावरण () डरावना नहीं विंडो खोलें और मेनू से मिक्सर परत का चयन करें अगर यह पहले से ही चयनित नहीं है. उसके बाद: नई

Creating a Bus Channel from the Environment's 'New' Menu.

चित्रा 1: पर्यावरण की 'नई' मेनू से एक बस चैनल बनाना.


ओह, और "बस" के रूप में चित्र 1 में मेनू में देखा आप aboveconfuse का नामकरण नहीं करते. जब आप इस कार्रवाई करते तुम एक बस नहीं बना रहे हैं. उस मेनू के माध्यम से पीछे की ओर काम, तो आप बस चैनल (पट्टी) का निर्माण कर रहे हैं. और कि सवाल begs ...


एक बस चैनल एक बस के रूप में समान है?

नहीं. बस एक आभासी तार है कि एक चैनल पट्टी (स्रोत) से एक और (गंतव्य) के लिए ऑडियो संकेत भेजने के लिए इस्तेमाल किया है की तरह है. एक बस चैनल के स्तर को नियंत्रित करने के लिए प्रयोग किया जाता है और, अगर वांछित, बस खुद पर सम्मिलित प्रभाव जोड़ने के लिए, सभी के लिए नीचे वर्णित किया जा. लेकिन पहले, चलो तर्क Busses पर एक करीब देखो के साथ जारी है.

तर्क 64 स्थायी Busses है, दूसरे शब्दों में, उन सभी को 64 के सभी समय पर उपलब्ध हैं. वे व्यक्तिगत चैनल स्ट्रिप्स और auxes की तरह बनाया जा जरूरत नहीं है. और आप Busses की सूची देखने के लिए जब भी आप क्लिक करें और भेजने के लिए स्लॉट बनाने के एक नए भेज पर पकड़ कर सकते हैं. क्या ऊपर आता है? Busses की एक सूची है! डिजिटल या आभासी "तारों". ऑडियो रास्ते.

The Bus Menu.

चित्रा 2: बस मेनू.


अपने भेजने के लिए एक बस का चयन करने के बाद, तर्क स्वतः एक aux बनाता है, और कि बस के उत्पादन स्वचालित रूप से aux के लिए इनपुट के रूप में चुना है. Aux के लिए एक प्रभाव प्लगइन जोड़ें भेजने की बारी है, और तुम अब aux इस आभासी तार के माध्यम से प्रारंभिक चैनल से संकेत दोहन कर रहे हैं. ही सादगी (चित्रा 3 देखें).

Figure 3: Bus Signal Flow from Send to Aux.

चित्रा 3: सिग्नल फ्लो बस से औक्स के लिए भेजें.


सूचना कैसे, चित्रा 3, भेजने से संकेत के स्तर (0 DB) सेट में भी aux चैनल पट्टी में परिलक्षित होता है. हम शब्द "एकता लाभ" का उपयोग करने के लिए इस स्थिति है, जहां गंतव्य पर एक संकेत के स्तर स्रोत से संकेत के स्तर के बराबर का वर्णन.

निष्कर्ष: Busses एकता लाभ, यानी, स्तर में कोई परिवर्तन नहीं स्रोत से गंतव्य के लिए संकेत ले. अगर हम नीचे के स्तर कहते हैं, -6 डीबी भेज बारी करने के लिए गए थे, aux स्तर मीटर -6 डीबी के रूप में अच्छी तरह से प्रतिबिंबित करेगा. फिर, एकता लाभ. या, यह डाल करने के लिए एक और तरीका है, "के स्तर में कोई फर्क स्रोत से गंतव्य के लिए" .

हालांकि, वहाँ बार जब आप उस बस पर संकेत के समग्र स्तर बदलने के लिए, या सभी बस के साथ बह रही संकेतों के लिए एक आम प्रभाव जोड़ना चाहते हो सकता है. और जब ऐसी स्थितियों उठता है, बस चैनल बचाव के लिए आ!


दानव Taming

एक बस चैनल एक बस के उत्पादन के लिए एक मात्रा पर नियंत्रण है, और यह भी एक तरीका है करने के लिए बस पर सीधे प्रभाव सम्मिलित है! चित्रा 4 में हम कई दिलचस्प चीजें देखते हैं, संकेत प्रवाह के साथ शुरू. बस चैनल अंत, या उत्पादन पर तैनात है, बस खुद की, और यहाँ हम यह बस के लिए एक मात्रा पर नियंत्रण के रूप में अभिनय देखते हैं:

Figure 4: Bus Signal Flow with a Bus Channel Added

चित्रा 4: बस एक बस चैनल के साथ सिग्नल फ्लो जोड़ा गया.


चैनल पट्टी पर भेजें एक से निकलती संकेत 0dB के स्तर पर है, लेकिन बस चैनल पर fader यह -7.3 डीबी को कम कर देता है. इस स्तर में कमी बस एक संकेत के लिए अंतिम गंतव्य के स्तर मीटर में परिलक्षित होता है:

बस चैनल के लिए कई अत्यधिक उपयोगी अनुप्रयोगों, सहित छोटे से सराहना की अवधारणा है कि वे भी मास्टर ऑडियो और साधन चैनलों के समूहों के लिए या समूह ट्रिम नियंत्रण के रूप में इस्तेमाल किया जा सकता है, कर रहे हैं. यह अकेले आवेदन लंबे समय मांग के बाद "छाँटो" ट्रैक स्वचालन कार्यों के तर्क पैलेट से लापता समारोह प्रदान करता है. और सभी चैनल स्ट्रिप्स की तरह, बस चैनल स्वचालित किया जा सकता है.

मुझे आशा है कि इस संक्षिप्त लेख बस चैनल का उपयोग करने के लिए संभावनाओं में आपकी रुचि उत्तेजित है. यदि आप अधिक जानकारी चाहते हैं, में अपने प्रश्न पोस्ट कृपया एमपीवी तर्क फोरम लेख के अंत में या यहाँ. में और अधिक इच्छुक हैं? मुझे पता है और मैं एक अनुवर्ती लेख बस चैनल के लिए अतिरिक्त, वास्तविक दुनिया अनुप्रयोगों दिखा करना होगा.

इस बीच वहाँ एक पूरी तर्क के बारे में बहुत कुछ सीखना है, और आप इन के साथ और अधिक जानकारी प्राप्त कर सकते हैं तर्क वीडियो Tutorials

Peter Schwartz, composer, orchestrator, arranger, pianist, synthesist, and musical director, began piano studies at age 5 and went on to earn a degree in piano performance from Manhattan School of Music. It wasn't long afterward that he began working as a product specialist for New England Digital (Synclavier) and also as a sound progr... Read More

Discussion

Mojave
Great points Peter, as always brilliant. I really am more inclined now after reading to change my template and create the group master buss channels for all my groups then before reading this.

I hope that makes you feel complete! Ha ha
Seriously, working with logic's enviroment is like working with those electronic kits form Radio Shack as a kid. You can create anything it seems!

Geo.8
Thanks, Peter! Can you please elaborate more on the various applications with Bus Channels? Also, is it possible to have the Bus Channels appear in the Mix Window? If not, how do you suggest to use the Environment as Mix window to optimize workflow and flexibility? Thanks!
Peter Schwartz
Thanks for your replies guys!

Mojave, definitely -- using busses as groups is a perfect use for them. Also glad to know that there's another soul out there who used to buy those Radio Shack kits!

Geo.8,

Bus Channels will appear in the Mixer window just like other channel strips. All you have to do is enable the "bus" button in the top right-hand area of the Mixer window 'frame'.

Regarding the Environment mixer layer, that's pretty much my go-to window for mixing. Or, to put it another way, I use the Mixer window pretty sparingly. There are 1000 reasons why, with one of them being a matter of personal preference. I couldn't live without the ability to re-arrange the position of channels and other objects in the Environment mixer layer to suit whatever it is I'm doing. And because my Environment mixer layer is displayed on a monitor that's rotated 90º (page orientation) so I can see way more on the screen at once.

Finally, in terms of additional applications for Bus Channels, I'll post about that a bit later.
Geo.8
Thanks Peter! Can't wait to read your next tips!!
Peter Schwartz
Looks like a follow-up article on bus channels is in the cards. Stay tuned!
lostinthesound
Peter, you just blew my mind completely as I'm one user who has been treating an Aux with a Bus input as a bus channel (face palm).

Cheers.
DR
Ski, would be really cool to see how you organize your environment layer for mixing. Could you post some screenshots?
JB
I know this is a very old post, hoping you're still monitoring as I found this article very informative and am intrigued by the possibilities of using a Bus Channel object.

Can I assume that the main scenario in which you'd use a bus channel object to control things like EQ and gain is when a bus is going to several different auxes that require the same pre-treatment, as opposed to just one submix (in which case you could just insert your trim control or EQ at the top of an aux's inserts and have the signal flow through to the aux's intended target FX afterwards)? I imagine that this would cut down on CPU usage and save time creating the same EQ/trim controls for each aux track. Could you please let me know if I'm missing out on some other obviously beneficial application? Thanks!

Want to join the discussion?

Create an account or login to get started!