रिवर्स देरी और रिकार्ड में Reverb प्रभाव बनाना

One of my favourite methods to create special effects is to use reverse delays and reverbs. It's a great way to produce something a little unusual and enter the world of sound design.  

एक विशेष प्रभाव बनाने के लिए मेरा पसंदीदा तरीकों में से के लिए रिवर्स में देरी और reverbs का उपयोग करने के लिए है. यह एक शानदार तरीका है के लिए एक असामान्य थोड़ा कुछ का उत्पादन और ध्वनि डिजाइन की दुनिया में प्रवेश करने के लिए एक महान तरीका है. यहां तक कि शुरुआती यहाँ में कार्रवाई पर प्राप्त कर सकते हैं.


Im इस ट्यूटोरियल के लिए Propellerheads रिकॉर्ड का उपयोग कर, लेकिन अनिवार्य रूप से तुम वापस ऑडियो खेलने की क्षमता के साथ किसी भी काला कौवा इस्तेमाल कर सकते हैं कि देरी और
reverb प्लग - इन्स प्रभाव सुविधाएँ. तो अच्छी तरह से thats, ... बस के बारे में हर ग्रह पर काला कौवा!

01 - कुछ ऑडियो करने के लिए प्रक्रिया का चयन


First up you’ll need to focus on a specific audio part to process. Here I am using a vocal clip as I find that these effects work very well with vocals. My part is in total isolation so everything is nice and clear but of course if you are working on a project you can complete this process on one part amongst many.

With your audio selected make sure it’s solo’d and playing in total isolation. Now is a good time to check your audio for any faults, clicks, pops or overs. The last thing you need here are any imperfections being amplified by the processing... So make sure your audio is super clean.

The audio that we’ll be treating is isolated

ऑडियो है कि अच्छी तरह से इलाज हो अलग है


The vocal we are going to process is isolated:

[ऑडियो आईडी = "6187"]

02 - ऑडियो Reversing


Next open your audio file in your DAW’s audio editor. Record now features a more fully featured editor and has quite a few options for processing, one of which is the reverse function and this is exactly what we are after here!

The audio is reversed

ऑडियो उलट है


Once the audio is reversed play it back to check everything is present and correct. Also double check your levels at this point and ensure that you are working with plenty of headroom, you’re going to need it when the processing is applied.

Our reversed audio is ready

हमारे उलट ऑडियो के लिए तैयार है


The vocal is reversed:

[ऑडियो आईडी = "6185"]

03 - Reverb या देरी लागू


For the purpose of this tutorial I have decided to show the effect with both delay and reverb, so I have set up two send / returns in Record’s mixer. I have used Record’s excellent RV7000 Advanced Reverb to produce a very large reverb and a dedicated delay based Combinator to pump out a tape Echo pre-set in the other.

The return effects are added

वापसी प्रभाव जोड़ रहे हैं


The effects sends in Record’s mixer

प्रभाव रिकॉर्ड्स मिक्सर में भेजता है


The reversed audio with reverb added:

[ऑडियो आईडी = "6186"]

... और स्टीरियो देरी से:

[ऑडियो आईडी = "6188"]

के साथ इन दो प्रभाव स्थापित मैं उन दोनों के लिए हमारे उलट मुखर भेजने में सक्षम था. प्रभाव हो रही है हम पहले से ही सुंदर विशेष रूप में आप नीचे दिए गए क्लिप में
सुन सकते हैं. अब तक हम इस प्रक्रिया के माध्यम से आधे रास्ते के बारे में हैं और कुछ कदम के लिए जाने से पहले हम कर रहे हैं.

04 - निर्यात प्रभाव केवल


We need to export the results of our processing, and there are really two ways to go about this. You can export the whole thing, in other words the audio and effect, or you can export just the effects. 

In this case I exported just the effects stream as I’m a firm believer that this method gives you much more control over the finished product and a more balanced sound in general. 

Record offers some really great features for exporting very specific parts of your mix (an area from which other DAWs could learn a thing or two!). Once you have accessed the ‘Bounce mixer channels’ area you can actually home right in on the specific effects devices and just render their outputs.

Record’s fully featured export window

रिकॉर्ड्स पूरी तरह से निर्यात खिड़की विशेष रुप से प्रदर्शित


With the isolated effects exported they are ready to be brought back into the project and mixed with the original dry parts to create the final effect.

The reverb effect in isolation:

[ऑडियो आईडी = "6190"]

[ऑडियो आईडी = "6189"]

05 - पुनः आयात परिणाम, संपादित करें सिंक, और मिक्स


The bounced fx streams can now be imported into a couple of new audio tracks. Once this is complete you can go ahead and reverse all of the audio so everything is technically playing in it’s original state.

Reversing and aligning the tracks

Reversing और पटरियों aligning


The newly imported (and reversed) effects audio will now need to be moved around so that it works nicely with the original dry parts. To do this I would strongly advise you to switch off any snap mode. This will allow you to be extremely accurate with the placement and give you a better chance of getting things right.

I generally use any obvious transients to get things in line. Although the effects have often masked much of the dynamic signature you should find this pretty straight forward and the effect files are usually pretty forgiving, so you don’t have to be mathematically correct here!

All the tracks are now aligned

सभी पटरियों अब गठबंधन कर रहे हैं
Once the files are all in place you can mix their levels to strike a good balance between the  dry and effected files. What you should be left with is a great reverse reverb (or delay) effect. As you have all the files you also have complete control over levels, pan and any further processing you might want to apply.

All the sounds are now mixed to create a good overall balance

सभी लगता है अब एक अच्छा समग्र संतुलन बनाने के लिए मिश्रित कर रहे हैं


The reverse reverb effect is mixed with the original vocal:

[ऑडियो आईडी = "6191"]

और देरी प्रभाव भी मिलाया जाता है:

[ऑडियो आईडी = "6192"]

06 - इसके अलावा संपादन और पुनर्चक्रण


Although the effects already sound great you can always take things a step further if you like. You can cut your effected files up, reverse sections, add automation and even more effects processing if you like. All this can be done without effecting the original files.

Some automation is added to the delay audio

कुछ स्वचालन देरी ऑडियो करने के लिए जोड़ा जाता है


In this case I’ve automated the pan on the delay channel and added some modulation effects to the reverb. The result is a trippy collage of sound that really enhances the vocal phrase. Now go and create your own reverse effects and see what you can create!

Extra effects are also added to our reverse reverb

अतिरिक्त प्रभाव भी हमारे रिवर्स reverb करने के लिए जोड़ रहे हैं


The final result with the extra effects and automation:

[ऑडियो आईडी = "6193"]

Mo has been a professional in the music industry for around 15 years. He has released material with the world's leading record labels and also produces music for TV and Film. Mo is also a prolific writer and is a regular contributor to magazines such as Music Tech, Future Music and EQ magazine. There isn't a piece of music software tha... Read More

Discussion

Mk Music Records
Thanks I will try this one
Mojave
Neat!

Want to join the discussion?

Create an account or login to get started!