Comment créer un cross-fader de l'Environnement de Logic

Every DJ Mixer has a cross-fader. In fact every DJ Mixer has three essential functions. A volume fader for one audio source, a volume fader for a 2nd audio source and a crossfader.  

Chaque DJ Mixer est un cross-fader. En fait, chaque DJ Mixer a trois fonctions essentielles. Un potentiomètre de volume pour une source audio, un fader de volume pour une seconde source audio et un crossfader. Le crossfader permet au DJ de fade out une source, tandis que la décoloration dans l'autre source.

Voici comment faire pour créer un crossfader de base, mais très efficace dans l'environnement de Logic. Cette astuce est utile pour Logic 5, 6, 7 et 8 utilisateurs! Vous pouvez utiliser audio existants ou des pistes d'instruments logiciels, mais pour cet exemple, je vais créer un crossfader à mélanger deux pistes audio.


Étape 1 - Démarrer avec deux pistes

Créez deux nouvelles pistes audio stéréo et d'importer vos fichiers audio sur chaque piste dans la zone Arrangement.


Étape 2 - Entrez dans l'environnement

Ouvrons la fenêtre Environnement: Fenêtre

Environnement de Logic permet à l'utilisateur d'acheminer les signaux, les faders de contrôle, de créer des objets personnalisés et bien plus encore.

Cliquez sur le Menu contextuel des calques de l'inspecteur et sélectionnez le calque de mixage.


Étape 3 - temps de transformer

Nous pouvons relier des objets les uns aux autres très facilement dans l'environnement. Il suffit de glisser la sortie d'un objet (en haut à droite de l'objet) et l'abandon du câble sur un autre objet sera de créer un câble de l'un à l'autre.

Si vous connectez le canal 1 au canal de bande bande 2 et déplacez le curseur de volume sur la bande de la première chaîne, vous remarquerez que vous avez maintenant le contrôle du potentiomètre de volume sur la bande de deuxième canal aussi.

Pour notre crossfader nous voulons que les modifications que nous apportons au fader de volume sur une des bandes de canaux d'être inversé sur la bande d'autre voie. Donc, quand le fader de volume du canal bande 1 est à son plus haut niveau, des bandes de canaux 2 est, en substance, en sourdine ... Voici comment nous le faisons.

Nouveau

Câble la sortie du canal bande 1 au transformateur. Maintenant câble de la sortie du transformateur à des bandes de canaux 2.

CS1

It should look something like this:


Étape 4 - Inversion des données

Double-cliquez sur le transformateur pour voir ses options. Si cela est votre première fois dans l'environnement cela peut sembler un peu intimidant, mais ne vous inquiétez pas, ce bit n'est pas compliqué, et vous n'avez pas besoin de fouiller trop profondément pour obtenir ce travail.

Un transformateur peut, comme son nom l'indique, de prendre les données qu'il reçoit et le transformer en un autre type de données. Par exemple, nous pourrions transformer les événements de note MIDI ou des données de volume ou pan en autre chose.

Dans ce cas, si nous laissons les conditions rangée vide, nous n'allons pas pour filtrer les données en provenance de la Transformateur. Nous, cependant, besoin de changer la valeur du volume de données de l'inverser. Ceci est reflété dans octet de données 2 dans la zone des opérations.

Cliquez sur la chute de DB2 dans le menu déroulant et choisissez inverse.

Maintenant, déplacez le curseur de volume sur le canal 1 et la bande, vous remarquerez que se déplace le canal de la bande 2 fader de volume dans la direction opposée! Nous avons un crossfader!


Étape 5 - Round-Tripin '

Si vous essayez d'ajuster le fader de volume sur le canal de bande 2, vous remarquerez que rien ne se passe au fader de volume sur la bande de la première chaîne. C'est parce que le fader de volume de données ne sont pas envoyées à partir de la bande de canaux.

Câble la sortie du canal de bande 2 au transformateur

CS2

Maintenant, essayez de déplacer le curseur de volume soit sur des bandes de canaux et vous verrez qu'il fonctionne très bien.


Étape 6 - Création du crossfader

Bien que cela fonctionne très bien, c'est pas drôle en faisant glisser le fader de volume sur une des bandes de canaux d'un fondu enchaîné entre deux pistes. Créons un grand crossfader.

Nouveau

Maintenant, il est complètement à vous de choisir l'apparence du fader. Vous pouvez toujours le changer plus tard en choisissant le style souhaité dans l'Inspecteur.

Vous pouvez redimensionner le fader en faisant glisser le carré dans le coin inférieur droit de l'objet.

Make sure to cable from the new Horizontal Fader's output to one of the channel strips.

Nous avons maintenant un crossfader entièrement fonctionnel!


Étape 7 - Faire un crossfader flottante

Vous pouvez maintenant voulez prendre vos crossfader partir de l'environnement dans la zone Arrangement. Nous avons besoin pour rendre votre environnement dans une fenêtre flottante, mais d'abord désactiver le mode Link dans la fenêtre de l'Environnement.

Maintenant, la position du crossfader en haut à gauche de la fenêtre de l'Environnement. Faites un clic droit sur ​​le fond gris de la fenêtre de l'environnement et faire en sorte que protéger les positions et cacher les câbles est cochée et aussi Frameless fenêtre flottante aussi.

Vous pouvez désormais redimensionner la fenêtre flottante pour l'environnement montrent autant ou aussi peu que désiré et avoir accès à du crossfader chaque fois que vous êtes dans votre zone Arrangement.


Vous voulez en savoir plus Astuces Logic Environnement Conseils n ' ? Cliquez ici !

Rounik is the Executive Editor for Ask.Audio & macProVideo. He's built a crack team of professional musicians and writers to create one of the most visited online resources for news, review, tutorials and interviews for modern musician and producer. As an Apple Certified Trainer for Logic Pro Rounik has taught teachers, professional... Read More

Discussion

Eric
Great work! Also, I liked your randomizer TNT that you did. I've heard you say before that you would like to see some development in the environment in Logic in the future. I was curious as to what you would like to see? Thanks to the MPV tutorials I understand the environment but I still don't find myself going in there too frequently.

I would love to see a blog post about the most effective way to create and manage controller assignments with zone groupings etc! I get how to do it but I haven't figured out a solid workflow method for storing and recalling my controller assignments. I think it would help a lot of people out... especially since I haven't ever seen the controller assignment window addressed in any tutorials thus far.

Thanks, you guys rock!
Rounik
Hi Eric

Thanks! I really enjoyed doing that TNT Randomizer. In fact I made a souped up version which can be downloaded here:
http://www.macprovideo.com/forum/logic/logic-pro-express&id=22544

There are loads of features I'd love to see in the Environment. Here are two which spring to mind in my early morning state:
- GUI of objects to be more like that in Mainstage2.
- Objects that can process Audio data... this would be amazing... and Huge!

I like the idea of a Controller Assignments blog tip... I'll have a think about that because it is potentially a huge topic.
Thanks Eric!
Ryan
Hi Eric!

Is there any way to automate that crossfader object (or ANY object in the environment)?? I can't find ANY literature about that, and it makes me think...

WHAT THE HELL ARE ENVIRONMENTS GOOD FOR IF YOU CAN'T AUTOMATE THEM??

Thanks for the informative post!

Ryan
Rounik
Hi Ryan

I actually wrote the post ;-p

Yes you can record movement of faders in the Environment as automation data.

I should write a post on this... although cool stuff like this is covered in Steve H's TNT2 (& I suspect to be release TNT3):
https://www.macprovideo.com/tutorial/logic304
and if you search the www.macProVideo.com forums you'll find it discussed too.

Anyway, back to your question: The normal way to do this is to create a transformer. Open the Transformer and leave all the conditions and operations settings as they are. Only change the mode to Track Automation splitter (true -> top cable).

Now cable the output from your 'last environment object, e.g. the CrossFader in this case to the transformer.

Take the top output cable from the transformer into a new channel strip. In this case I'd recommend creating a blank new audio track.

Finally cable the audio channel strip's output to the crossfader. Done.

In most other environments all you'll need to do is create the transformer and output it to the channel strip.

Thanks
Rounik
Albert Wifstrand
If I use a Button Fader instead of Horizontal 4, the volume goes immediately from 0 to 100% so it's like muting channel 1 and unmuting channel 2 really quickly. This is expected, of course, but is there a way to use a Button Fader so that it causes a smooth crossfade transition upon clicking it? In other words, I'd like to have a pre-set crossfade with a fixed duration so I won't have to manually fade with a Horizontal 4.
Rounik
Hi Albert,

Getting a smooth transition is a bit tricky. I'd try making use of the delay line and a transformer or two to add a value that will be delayed a certain number of times before it reaches the Cross fader... but even this may produce a step-like effect, rather than a truly smooth effect.

Also, when using "live" objects like the delay line, Logic's transport must be in "play" mode...

I'd recommend checking out Steve H's TNT tutorials for more info on the Environment... and bear in mind that Logic isn't really designed to be used as a live DJ tool - although it can be in many ways.

Pop by the macProVideo.com forums if you'd like to chat more about the Environment. Perhaps we can figure something out for this...

Cheers
R
tklM
found your post inspiring and i did that :
http://c.foulc.free.fr/crossfader.jpg

i added clearer ways,
exponential crossfading
and dividing (not to get to +6dB)

cheers :)
Rounik
Hi tkIM,

Thanks! Really glad you found this article inspiring!

I love what you've done with your environment too. Great idea.

If you're interested in more Logic Environment trickery & magic - have you checked out the Logic TNT2 and Logic TNT3 series?

Also, there's this thread here with some excellent environments for you to download and modify to your heart's content!
http://www.macprovideo.com/forum/logic/logic-pro-express&id=22544

Thanks again! Appreciate your comment :)
Tedd Firth
Hi Rounik,

Thanks for the well-written post on this. I'm slowly coming to terms with working with objects like this in the Environment.

My question is whether it's possible once you've created the fader object to function as a cross-fader to control the fader object with an external control surface--for example a fader on a keyboard controller. I would imagine there's a way to do this, but I haven't quite figured it out yet. Any thoughts on this would be greatly appreciated, and thanks again for this post and the many other great posts you've written for the site.

Tedd
Rounik
Hi Tedd,

Thanks. It is possible to do what you want!

First step is to go to the Clicks & Ports Layer in the Environment. Now move the slider/fader on your MIDI Controller.

Notice the MIDI message being sent to Logic (look at the Monitor object or even the Transport's MIDI In area).

The first two values are most important. They show the MIDI Channel and then the CC number.

Next, create a new fader and set its Input controls to match the values above. Then make sure its output value matches of the input of the Crossfader. (Don't use CC 7 or 10 (volume or pan) - it'll lead to a bag of hurt ;-)

Next you need to connect the new fader to the cross fader and then connect from the input notes or input view object to the new fader. This will allow the MIDI value coming in to control the new fader, which in turn will control the cross fader.

Hope this make sense.

R
Tedd Firth
Rounik,

Thanks so much! Very clear and easy to understand, I had it working within minutes. Thanks again for all your tutorials and contributions to the site, I'm learning a lot.

Tedd
Rounik
Hi Tedd,

No problem and glad it was easy enough to follow.

Hope you keep enjoying MPV :)
Tedd Firth
Hi Rounik,

Oops, I might've spoken too soon. When I cable the new fader from the input view in Clicks & Ports to the cross-fader object it works fine--the slider on my MIDI keyboard controls the cross-fader object as desired. However, when I play my MIDI keyboard I find that I'm triggering both software instruments that are being controlled by the cross-fader, resulting in a layered sound. Not sure if there's a workaround for this, but figured I'd ask. Thanks again for the advice--very clear and easy to follow.

Tedd
Rounik
Hi Tedd,

No problem. Probably easier to watch the Logic TNT2 and TNT3 videos as use of a transformer will give you so much flexibility when working in the Environment.

However, for now, try setting the New Fader's Filter to ALL. That should work - but I'm not near Logic right now to double-check.

:)
Tedd Firth
Hi Rounik,

Thanks! It totally worked. Also, if the filter is set to "other" it seems to work as well. In fact, I'm a little confused as to why it works with the filter set to "All"--that would seem to mean that the filter would block all MIDI information from getting to the fader, meaning that the control change info from the keyboard's slider wouldn't get to the fader to adjust it's level. It works, though, so I'm satisfied.

I have started to check out some of the TNT videos on transformer objects--very interesting (and occasionally complicated) stuff. Thanks again for taking the time to answer, sorry about all the follow-up questions.

Tedd

Want to join the discussion?

Create an account or login to get started!