完全初学者指南苹果逻辑:第2部分

Recording audio. Whether you are a seasoned guitarist, a hobby vocalist or even an electronic musician, at some stage you'll want to record audio into Logic. In the second part of this series that's  

录制音频。无论您是一位经验丰富的的吉他手,一个爱好歌唱者,甚至是电子音乐家,在某些阶段,你要记录到Logic音频。这正是我们打算做这一系列的第二部分 - 探索建立和记录到Logic音频的基础知识。在我们开始之前,我建议你检查出这个完整的初学者指南这里的逻辑

在Logic 8或9的音频记录是更快,比以前的版本更容易。即使你没有连接到Mac的外部音频接口(如远地点例如由于吨),您可以使用内置麦克风或者内置的线连接。这个职位,我将用我的值得信赖的二重奏,但我们也将采取看看你可以如何选择Logic将录制的音频设备。


第1步

我假设您已经阅读这个系列的第一部分 ,了解模板和轨道。

如果您使用的是外部音频接口的第一步是插入到你的Mac FireWire或USB端口。

现在推出的逻辑,并选择一个空的项目。


第2步

从对话的新的轨道,选择下列各项:

- 1音轨

- 格式:单声道(当您录制来自麦克风或线路输入,像一把吉他,它是一个单声道输入)。这是很正常的录制人声,吉他,一个麦克风等使用。

- 输入1(或任何输入你想从你的音频接口记录在我的情况下,我有一个麦克风插入我二重奏1输入。)您可以更改这些设置。

- 输出:缺省逻辑的信号输出,将通过您所选择的音频接口,立体声输出。我离开矿山,在输出1-2。

当你完成后,单击“ 创建 ” 。


第3步

We need to check that Logic is setup to use your audio interface as the audio input.
Choose Logic Pro > Preferences > Audio...

根据设备核心音频 “选项卡,确保启用打勾。如果被禁用的Core Audio,你会得到没有逻辑的声音了。

接下来,您可以设置为逻辑输入和输出设备。

(If you are a Logic 8 user you'll be restricted to setting the Device which will use the input and output from the same device only. Pop by the Logic forums for advice on how to have Logic 8 recognize different ins and outs).

我为我的二重奏我的输入设备,因为我有我的耳机插入我二重奏耳机插孔,我会选择太作为输出的二重奏。


第4步

我建议录音时确保始终检查,24 - bit录音。如果任其发展逻辑,将记录在16位音频,这将给你一个较低的动态范围。我没有空间这里要说明一下关于位深度和采样率,所以检查出101的逻辑逻辑401提供了一个恒星和位深度和采样率更密切的检查,以及如何掌握了逻辑项目。

开启软件的监控 ,使您能够听到你的地方你的音轨上录制过程中的任何插入效果。

如果你所做的任何更改,然后单击 Apply Changes和关闭Preferences窗口。


第5步

开始录制的时间!但在此之前,我们再往前走重要的是要保存你当前的项目。这将使它轻松了许多逻辑,知道在何处放置录制的音频文件。

选择“文件”

选择一个文件夹,并给项目取一个名字。逻辑,然后将新文件夹创建一个新的文件夹内,该名称和项目文件。我真的建议你打勾的包括资产检查箱,因为这会给你什么资产或文件,并设置将保存项目文件夹内的进一步选择。

单击“ 保存 ”当你完成。


第6步

我们跳进录制之前,我们需要记录使我们的音轨。这不能再简单。点击轨道头,或记录在督察的音频通道地带就绪按钮上的“R”的图标(记录准备按钮)。他们都是同一个。

您现在应该能够听到从你的音频接口信号。如果您不能检查音频通道条I / O部分。确保在您的音频接口上,输入和输出匹配的物理输入和输出。

这是一个好时机,发挥您的仪器,确保音频信号的逻辑永远不会裁剪或扭曲。您可以控制​​您的音频接口上的增益或电平输入。


第7步

接下来,如果你正在录制基于什么节奏,你可能要调整该项目的节奏。默认情况下,一个新的项目有120 BPM的节奏。使用点击跟踪和播放按钮,就可以得到一个节奏的感觉,无论是太快或太慢。然后双击数值,在进入一个新的价值的调整速度值。


第8步

当你准备好了,播放头移动到开始该项目(或任何你想开始录制),然后单击“ 在运输的记录“按钮。逻辑将开始录制,并在计数,默认情况下,酒吧之一。

停止时,即可大功告成。

现在是时候听准备的轨道头记录按钮来点击你的表现来禁用它。这意味着你不会监控通过您的音频接口,以及听什么逻辑记录!现在按下播放坐下来享受您的演奏录音。

这是有它... ...这些步骤包括:光秃秃的骨头... ...逻辑9音频记录的绝对基础。有如此多的探索,我真的不能强调不够,逻辑是深刻的,精彩,很能干。若要了解如何打孔,录制和编辑采取文件夹,比赛需要,对飞一拳,多个输入记录,正确的时机错误,等,等检查出我们的专家逻辑教程在这里逻辑101核心逻辑是最好的地方,继续你的音乐与逻辑9旅程。

如果您需要进一步帮助或任何其他逻辑或Mac软件的问题请访问我们www.macprovideo.com/forum/


Rounik is the Executive Editor for Ask.Audio & macProVideo. He's built a crack team of professional musicians and writers to create one of the most visited online resources for news, review, tutorials and interviews for modern musician and producer. As an Apple Certified Trainer for Logic Pro Rounik has taught teachers, professional... Read More

Discussion

joseph pirillo
i am getting feedback when i try to record audio track #2. Audio #1 plays back fine but when I press
the input monitoring button, I get this this loud feedback and shut it down. I know the answer is simple and I have done it before, I am just getting back into recording and am incurring this problem. My system is presonus firebox from a mackie 1202 mixer into a IMac -intel. Hope you can help. Also, any help / insight with bringing video in from IMovie 9 and recording whilst video is playing would be appreciated. Any tips or shortcuts ? thank you, joe
Rounik
Hello Joe,

Are you using Headphones to monitor the sound or Speakers?

I would check that the connections between firebox and 1202 are correctly routed and check that the input gains are not set too hot.

In Logic, is Audio track's input set to the Firebox's Input 1 or 2? Which input are you trying to record from?

Hope this helps
Rounik
Rounik
For more info on working with video in Logic, check out this blog post:
http://www.macprovideo.com/blog/logic-pro/started-film-video-logic-scoring-picture

I also recommend this tutorial on scoring to picture. It is fabulous!
http://www.macprovideo.com/tutorial/logic9203

Best
Rounik
Chuck Wigfall
Hey Guys I just obtained an apogee ensemble, I ned to know if I can run firewire cable to interface from a yamaha motiff,and into the mac pro, for audio recording and play back. //Chuck
Rounik
Hi Chuck,

From browsing the Yamaha Motif XS site it looks like you can indeed send MIDI and audio over firewire connection. I'm not sure how this would work through the Ensemble...(I've always used MIDI cables / USB to transmit MIDI data and audio cables for audio signal...)

Even if you can't connect directly to the Ensemble you should be able to interface with your Mac directly. I'd ask Yamaha and Apogee directly on this.

Let us know how you get on.

Best
Rounik
Jason Vearing
Really good tutorial. I can't even get a guitar sound. When I plug into garageband - I go through fast track, I select input fast track, output built in - then somehow I find the mono/ stereo, try out which mono - turn on monitor and eventually I get a signal - so I know that my set up is working.

I then close GB and open up logic, no sound. I change preferences to fast track input, built in out put - no sound. I enable software monitoring - no sound. Starting to get annoyed...

I click on R, still nothing. It seems to me that this might be really easy for people to grasp, but I really struggle just trying to get a signal and I cannot find anybody who posts this problem. Surely I'm not the only one - Can you help?
Rounik Sethi
Hi Jason,

If you're still suffering with this issue post a thread on the Logic forums at macProVideo here:
http://www.macprovideo.com/forum/logic/logic-pro-express

It's easier to follow your progress and post screenshots there.

Thanks

Want to join the discussion?

Create an account or login to get started!